OPTION menu (continued)
Item | Description |
LAMP TIME | The lamp time is the time counted after the last resetting. It is |
| shown in the OPTION menu as the use time of the lamp. |
| Performing this item resets the time. |
| Pressing the RESET button on the remote control or the button |
| ► on the projector for about 3 seconds displays a dialog to |
| make sure. To perform reset, point at RESET using the button |
| ▲. |
| RESET CANCEL |
| • Please reset the lamp time only when you have replaced the |
| lamp, for correct messages about the lamp. |
| • About the lamp replacement, please see the section “Lamp.” |
| ( 41, 42) |
FILTER TIME | The filter time is the time counted after the last resetting. It is |
| shown in the OPTION menu as the use time of the air filter. |
| Performing this item resets the time. |
| Pressing the RESET button on the remote control or the button |
| ► on the projector for about 3 seconds displays a dialog to |
| make sure. To perform reset, point at RESET using the button |
| ▲. |
| RESET CANCEL |
| • Please reset the filter time only when you have cleaned or |
| replaced the air filter, for correct messages about the air filter. |
| • About the caring the air filter, please see the section “Air |
| filter.” ( 43) |
ViewSonic PJ400 | 39 |
