ViewSonic manual Input Menu, ViewSonic PJ650

Input Menu

With the INPUT menu, the four items shown in the Table below can be performed. With inputting of RGB IN 1 and RGB IN 2 signals, the horizontal and vertical frequencies of the signals will be displayed on the initial screen of the INPUT menu.

Perform each operation in accordance with the instructions in the Table.

Item			Description
AUTO	Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H PHASE, and H SIZE.
	Use this function with the maximum window size.
	Auto Adjust (for VIDEO/S-VIDEO):Automatically selects the proper VIDEO mode for the current
	input signal. This function is active only when the AUTO mode is selected for the item VIDEO. Refer
	to the description for the item VIDEO below.
	This function may not be available with a PAL60 signal and certain other signals.
	The AUTO mode operation requires approximately 10 seconds.
	For COMPONENT VIDEO, the signal type is identified automatically even if this function is inactive.
	For a HDTV signal, refer to the item HDTV below.
VIDEO	Select Mode of Signal Type (for VIDEO/S-VIDEO):
	AUTO	NTSC	PAL	SECAM
		NTSC4.43	M-PAL	N-PAL
	Selecting AUTO mode activates and performs the AUTO function for VIDEO/SVIDEO. It
	automatically selects the proper mode from among those above. Use this function if the image
	becomes unstable with VIDEO/S-VIDEO. (e.g. The image becomes irregular, or lacks color.)
	• AUTO mode may not function correctly with a PAL60 signal and certain other signals.
	• The AUTO mode operation requires approximately 10 seconds.
	• For COMPONENT VIDEO, the signal type is identified automatically even if this func- tion is
	inactive. For a HDTV signal, refer to the item HDTV below.
HDTV	Select HDTV Signal Mode:
	1080i	1035i
	• If the selected HDTV mode is incompatible with the input signal, the picture may be distorted.
SYNC ON G	On/Off SYNC ON G Mode:
	TURN ON	TURN OFF
	Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode allows reception of
	SYNC on G.
	• In the SYNC ON G mode, the picture may be distorted with certain input signals. In such cases,
	remove the signal connector so that no signal is received and turn SYNC ON G off, and then
	reconnect the signal.

27 ViewSonic PJ650