ViewSonic PJ650 manual Screen Menu, Selection of Blank Screen, Selection of Start UP Screen

Screen Menu

With the SCREEN menu, the five items shown in the Table below can be performed.

Please perform each operation in accordance with the instructions in the Table.

Item			Description
BLANK	Selection of BLANK Screen:
	MyScreen	ORIGINAL	,	,	,	,
		,
	The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen
	has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the
	“Temporarily Blanking the Screen” section of the separate booklet, Vol. 1 (Basic)).
	MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen
	(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.
	ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
	Option screens: Various colored non-patterned (plain) screens displayed within the Menus.
	• The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color
	screen several minutes after being displayed.
START UP	Selection of START UP Screen:
	MyScreen	ORIGINAL		TURN OFF
	The START UP Screen may be voluntarily selected. The START UP Screen is displayed when no
	signal has been inputted, or when spec signals are being inputted.
	MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen
	(or screens). At the time of factory shipment, this is set as a non-pat- terned (plain) blue color
	screen.
	ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
	TURN OFF: A non-patterned (plain) blue color screen.
	• The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen several
	minutes after being displayed.

ViewSonic PJ650 28