ViewSonic SCT35BKUS0 manual Disabling the Appliance Mode

&RQfiJXULQJ &OLHQW 6HWWLQJV

&RQ¿JXULQJ6\VWHP6HWWLQJV

Disabling the Appliance Mode

To disable the Appliance mode, please do the following:

1.Under the Appliance mode, exit the Full Screen mode of the RDP / ICA session, or release the keyboard and mouse from the View session (virtual desktop):

t
To exit the Full Screen mode of the RDP session, press Ctrl + Alt + Enter, and then minimize the session window.

t
To exit the Full Screen mode of the ICA session, press Ctrl + F2, and then Alt + F9.

t
To release the keyboard and mouse from the View session (virtual desktop), press Ctrl + Alt.

NOTE

t
Please note that the View session (virtual desktop) will remain on the background after you release the keyboard and mouse from the View session (virtual desktop).

2. Click Ctrl + Shift + Del to launch ViewSonic Client Setup.

NOTE

t
You cannot access the Taskbar of the client operating system (ViewSonic ARM Linux) under the Appliance mode.

3.On ViewSonic Client Setup, click System > Appliance Mode.

4.Click to uncheck Enable Appliance Mode, and then click Save to apply the change.

5.Return to the current RDP / ICA / View session:

t
To return to the current RDP / ICA session, use Alt + Tab (press and hold Alt, and then press Tab to switch between different items) to select and restore the current RDP / ICA session.

t
To return to the current View session, click any place of the View session (virtual desktop) on the background.

6.Log off from the current RDP / ICA / View session.

7.The client will shut down then. Restart your client manually.