ViewSonic SCT35BKUS0 manual Configuring Wired Network Settings, Using a Dynamic IP Address

&RQfiJXULQJ &OLHQW 6HWWLQJV

&RQ¿JXULQJ1HWZRUN6HWWLQJV

4.5.2Available Settings at a Glance

Tab

Setting

Icon

Description

Section Page

Network

Ethernet	&OLFN WR FRQfiJXUH ZLUHG QHWZRUN VHWWLQJV.	4.5.3	69
	Click to create the mapping of IP addresses to
	the names of host servers. You can then use the
Hosts	name of a host server instead of its IP address	4.5.4	72
	wherever you need to specify an IP address while
	FRQfiJXULQJ FOLHQW VHWWLQJV.
Wireless	&OLFN WR FRQfiJXUH ZLUHOHVV QHWZRUN VHWWLQJV DQG	4.5.5	74
	create a wireless connection.	4.5.6	77

4.5.3Configuring Wired Network Settings

The Ethernet setting enables you to configure the wired network settings for your SC-T35 thin client.

Using a Dynamic IP Address

To use a dynamic IP address, please do the following:

1.On ViewSonic Client Setup, click Network > Ethernet.

2.Under the IP address section, click the drop-down menu to select DHCP for the IP type field.

NOTE

t
If DHCP is selected, the DHCP server over the network will automatically assign an IP address to your SC-T35 thin client. This is the default setting.

3. Click Save to apply.

Using a Static IP Address

To use a static IP address, please do the following:

NOTE

t
It’s recommended to use a dynamic IP address for your SC-T35 thin client in a corporate network environment.

1.On ViewSonic Client Setup, click Network > Ethernet.

2.Under the IP address section, click the drop-down menu to select Static IP for the IP type field.