ViewSonic N4251w
11
ENGLISH
Key “Defaults”The “default” out of box setting enables the Remote to control a predetermine TV,
DVD,STB, VCR, VPB, WMA and AUD.
• Depending on Device desire the following model will be active.
Device Default Setting
TV ViewSonic
DVD Samsung
STB RCA
VCR Sony
VPB ViewSonic
WMA ViewSonic WMA-100
AUD Sony
Note: Multiple pre-programmed codes are available for some devices; if default
setting does not function, see pre-programmed table for additional codes.
Resetting Remote • To reset remote and access default settings, press and hold desire device button
for roughly six seconds and enter three digit reset code 000.
• Replace batteries if remote control keys are not functioning properly, this is a
normal behavior that indicates batteries are low.