Optimizing the image
Selecting a preset mode
The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input source picture type.
To select a operation mode that suits your need, you can follow one of the following steps.
• Press MODE/ENTER on the remote control or projector repeatedly until your desired mode is selected.
•Go to the PICTURE > Preset Mode menu and press 
/ 
to select a desired mode.
The preset modes available for different types of signals are listed below.
PC Signal Input
1.Brightest Mode (Default): Maximizes the brightness of the projected image. This mode is suitable for environments where
2.Presentation Mode: Is designed for presentations. The brightness is emphasized in this mode to match PC and notebook coloring.
3.Photo Mode: Maximizes the purity of RGB colors to provide
4.Cinema Mode: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment.
5.User 1/User 2 Mode: Recalls the settings customized based on the current available preset modes. See "Setting the User 1/User 2 mode" on page 23 for details.
YPbPr/S-Video/Video Signal Input
1.Brightest Mode: Is suitable for playing
2.Standard Mode (Default): Is appropriate for viewing colorful movies, video clips from digital cameras or DVs.
3.Cinema Mode: Is suitable for enjoying dark movies or DVD movies best viewed in a blackened (little light) home cinema or lounge room environment.
4.User 1/User 2 Mode: Recalls the settings customized based on the current available preset modes. See "Setting the User 1/User 2 mode" on page 23 for details.
ViewSonic | 22 | PJ513D/PJ513DB |
