ViewSonic VS11959 warranty System Setup Advanced menu, Audio, Active VGA, Out On

SYSTEM SETUP: Advanced menu

FUNCTION	DESCRIPTION
(default setting /
value)
Quick Cooling	Enables or disables the Quick Cooling function. Selecting On
(On)	enables the function and projector cooling time will be shortened
	from a normal 90-second duration to approximately 30 seconds.
High Altitude	A mode for operation in high altitude areas. See "Operating in a high
Mode	altitude environment" on page 26 for details.
(Off)
	Enables or disables the DCR (Dynamic Contrast Ratio) function.
	Selecting On enables the function and the projector will
	automatically switch the lamp mode between normal and economic
DCR	mode according to the input image detected.
(Off)	This function is only available when a PC source is in use.
	After enabling DCR, frequent lamp mode switching may shorten lamp
	life and noise level will vary during operation.
Audio	Mute (Off)
	Volume (5)
Settings
	See "Adjusting the sound" on page 27 for details.
	Enables or disables the Active VGA out function. When selecting
Active VGA	On, the projector can output a VGA signal when it is in standby
	mode.
out (On)	Enabling the Active VGA out function increases the standby
	power consumption to less than 10W.
	Menu Display Time (15 sec)
	Sets the length of time the OSD will remain active after your last
Menu Settings	button press. The range is from 5 to 30 seconds in 5-second
	increments.
	Menu Position (Center)
	Sets the On-Screen Display (OSD) menu position.

ViewSonic 35 PJ513D/PJ513DB