ViewSonic VS11959 warranty Shutting down the projector

Shutting down the projector

1.Press Power and a confirmation message will display prompting you.

If you don't respond in a few seconds, the message will disappear.

POWER OFF

Pressbutton

again to power off

Press any button to cancel

2. Press Power a second time. The Power indicator light flashes orange, the projection

lamp shuts down, and the fans will continue to run for

approximately 90 seconds to cool down the projector.

To protect the lamp, the projector will not respond to any commands during the cooling process.

3.The Power indicator light is a steady orange

and fans stop. Disconnect the power cord from the wall socket.

• Do not unplug the power cord before the projector shutdown sequence is complete or during the 90-second cooling down process.

• If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the projector, the fans will run for a few minutes to cool down. Press Power again to start the projector after the fans stop and the Power indicator light turns orange.

ViewSonic 28 PJ513D/PJ513DB