If there is an old password then setup will prompt with the following window instead and a current password will be required to be entered at first:

Set Supervisor Password

 

 

Enter current password

[

]

Enter New Password

[

]

Confirm New Password

[

]

 

 

 

User can type password in field of enter new password”, and re-enter password in field of “confirm new password “for verification.

If verification OK:

Setup Notice

Changes have been saved.

[Continue]

The supervisor password is set complete after user press enter”

If verification fails:

Setup Warning

Password does not match

Re-enter Password

[Continue]

If password on boot is required, the password must be set otherwise it cannot be enabled.

The formats of the password are as follows:

Length

No more than 8 characters.

Characters Alphanumeric keys only. The shift status i.e. Ctrl, Shift, Alt, and Capital are ignored.

ViewSonic VNB132

22

Page 29
Image 29
ViewSonic VS13191 manual No more than 8 characters