Loading the battery
1.1
1.2
1Press the “PUSH” button, and then pull the battery cover downwards to remove it.
2 Place the battery into the compartment. Align the + and - metallic ends carefully.
3 Replace the battery cover.
Note that the + and - metallic contacts must be aligned with the corresponding contacts in the compartment.
Charging the battery
Before charge:
Power off the unit first and make sure the
Make sure your PC is powered on during the charge.
It is recommended to charge the battery for at least 8 hours before the first time usage.
LED light 1 Slide the USB switch downwards to reveal the USB connector.
2 Connect the USB connector to a USB port of a powered PC and the charge will begin. Use an extension cable if necessary.
The LED light turns amber when the charge is in progress. After the charge is complete, the LED light will turn green.
ViewSonic | 2 | 3DV5 |