ViewSonic manual Conference Control, Chapter IV Configure WPG, ViewSonic WPG-360

Chapter IV Configure WPG

4-1 Conference Control

When there is more than one presentation login to WPG, you can control the content from different presenter via Conference Control webpage.

Use the web browser to connect to the IP address of WPG (Wireless / Wired IP address). WPG’s IP address can be found at the lower-left corner of Instruction page (refer to chapter 2-1).

Click ‘Conference Control’ from

WPG’s web user interface.

All users currently logged in will be displayed here. To select a user’s display content in certain area of Quarter-Split Display, click number 1 to 4; to display in full-screen, click button of the presenting user. To stop a progressing presentation,

click

NOTE:

‧When “Administrator Mode” is enabled, all buttons of the application software will be disabled.

ViewSonic WPG-360 23