Viking Combination Beverage Center manual Selecting And Preparing The Overlay Panel

SELECTING AND PREPARING THE OVERLAY PANEL

	FOR A 3-1/2” TOE KICK
	(COVERS THE ENTIRE DOOR EXTRUSION)
	1/4” x 3/8” Deep hinge screw clearance hole. Locate and drill using door
Min. 5/8” (1.7 cm)	hinge hole after the door has been aligned to the unit and when the wood
Max. 3/4” (1.9 cm)	is positioned on door.

Mounting surface (non-face) side

23 3/4” (60.3 cm)

17 15/16” (45.6 cm) TYP

5 13/16” (14.8 cm)

23/32 “ TYP

		TOP
30 5/16”
		OF
(77.0 cm)
		DOOR
	13/16” TYP
	Both Sides

Pre-drilled pilot holes 10 places

Mounting surface (non-face) side

5 23/32”

(14.6 cm)

TYP

15 5/32”

(38.5 cm)

TYP

24 1/2”

(62.2 cm)

TYP

Mounting surface (non-face) side

1/4” x 3/8” Deep hinge screw clearance hole. Locate and drill using door hinge hole after the door has been aligned to the unit and when the wood is positioned on door.

7