Viking Combination Beverage Center manual Troubleshooting Chart, Problem, Possible Cause, Solution

Models: Combination Beverage Center

1 20
Download 20 pages 5.55 Kb
Page 15
Image 15

TROUBLESHOOTING CHART

 

Problem

Possible Cause

Solution

 

Odor in cabinet

Interior needs cleaning.

Clean the interior using a solution of baking

 

 

 

 

 

soda and war water or water and mild soap

 

Unit operates but does not

The unit has just been started and it

Typical ice production is 2 lbs per day. Allow

 

 

produce any ice

has been less than 24 hours.

for the freezer section to reach temperature

 

 

 

 

and the ice maker to cycle and accumulate

 

 

 

 

ice.

 

 

 

Water supply is not turned on.

Turn on water supply to the unit.

 

 

 

Inadequate water pressure to unit.

Water pressure must be at a minimum 20 psi.

 

 

 

The ice maker bale arm is in the

When the ice maker arm is in the uppermost

 

 

 

uppermost position

position, the ice maker is off. Flip the bale

 

 

 

 

arm down to turn on the ice maker.

 

 

 

Freezer section has not reached

Allow the freezer section to reach

 

 

 

temperature.

temperature.

 

 

 

Thermostat control knob is too warm.

Turn the temperature control knob to a

 

 

 

 

higher number to allow the unit to run

 

 

 

 

colder. Allow 24 hours before readjusting

 

 

 

 

the temperature control.

 

 

 

Blower inlet and/or outlet is restricted.

Keep blower area clear from commodities for

 

 

 

 

proper operation.

 

 

 

Condenser fan air flow is restricted.

Make certain the grille in front of the unit is

 

 

 

 

free and open for proper air circulation.

 

 

 

 

Check and clean the condenser coil by

 

 

 

 

removing the grille in the front of the unit.

 

 

 

 

Clean the condenser with a vacuum and

 

 

 

 

brush attachment.

 

 

 

Room and/or water temperature is too

Move the unit to an area where ambient

 

 

 

warm.

temperature is below 90oF. The unit should

 

 

 

 

not be placed next to a heat source such as

 

 

 

 

an oven. Check for cold water connection.

 

Small ice cubes

Water input may require adjustment

Due to differing water pressures, the ice

 

 

 

 

 

maker water input may require adjusting.

 

Noisy operation

Cabinet not level;

Adjust the leveling legs on the unit.

 

 

 

 

weak floor structure.

The unit must be locate on a sound and

 

 

 

 

sturdy floor for proper operation.

 

 

 

Water line tubing vibration

Adjust the tubing as necessary to prevent

 

 

 

 

unwanted vibrations.

 

Ice cubes sticking together.

Ice consumption is low.

Use the ice in the bin frequently. Ice will

 

 

 

 

 

stick together if left in insulated bin over

 

 

 

 

long periods of time.

 

 

 

Room temperature is too warm.

Move the unit to an area where temperature

 

 

 

 

is below 90oF.

 

 

 

 

 

 

15

Page 15
Image 15
Viking Combination Beverage Center manual Troubleshooting Chart, Problem, Possible Cause, Solution