Clearance Dimensions (Proximity to Cabinets)

Clearance Dimensions (Wood/Composite Overlay)

This range may be installed directly

 

adjacent to existing 36” (91.4 cm) high

 

base cabinets.

 

IMPORTANT: The side trim MUST be

 

3/8” (.95 cm) above the adjacent base

 

cabinet countertop. This can be

 

accomplished by raising the unit using

 

the adjustment spindles on the legs.

• The range CANNOT be installed

 

directly adjacent to sidewalls, tall

 

cabinets, tall appliances, or other

 

side vertical surfaces above 36”

 

(91.4 cm) high. There must be a

 

minimum of 6” (15.2 cm) side

 

clearance from the range to such

 

combustible surfaces above the

 

36” (91.4 cm) counter height.

Within the 6” (15.2 cm) side

 

clearance to combustible vertical

 

surfaces above 36” (91.4 cm), the

Wall cabinets above the range must be a minimum of 42” (106.7 cm) above the range cooking surface for the full width of the range. This minimum height requirement does not apply if a range hood is installed over the cooking surface.

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(

9-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

c

 

 

 

 

 

 

 

m

ax

.

 

 

 

 

 

 

m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

m)

 

 

 

 

 

 

 

 

 

 

 

 

1

 

c

 

 

 

 

 

 

 

 

 

 

 

 

 

.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

2”

 

)

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

4

.7

cm

 

 

 

 

 

 

 

 

0

6

 

 

 

 

 

 

mi

 

 

(1

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

(

5.

 

 

n.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The bottom of a standard hood should be 30” (76.2 cm) min. to 36” (91.4 cm) max. above the countertop. This would typically result in the bottom of the hood being 66” (167.6 cm) to 72” (182.9 cm) above the floor. Refer to the range hood installation instructions for additional information. These dimensions provide for safe and efficient operation of the hood.

W

 

 

 

 

 

 

 

o

 

 

 

 

 

 

 

o

 

 

 

 

 

 

 

d/

 

 

 

 

 

 

C

 

 

 

 

 

 

 

o

 

 

 

 

O

 

m

 

 

 

 

 

p

 

 

v

 

 

 

o

 

 

e

 

 

 

si

 

 

rl

 

 

 

t

 

 

 

a

 

 

e

 

 

 

 

y

 

 

W

 

 

 

 

 

 

 

o

 

 

 

 

 

 

 

o

 

 

 

 

 

 

 

d/

 

 

 

 

 

 

C

 

 

 

 

 

 

 

o

 

 

 

 

O

 

m

 

 

 

 

 

p

 

 

v

 

 

 

o

 

 

e

 

 

 

si

 

 

rl

 

 

 

t

 

 

 

a

 

 

e

 

 

 

 

y

 

 

6

 

 

 

 

 

 

 

6

 

 

 

 

1

 

 

 

 

 

mi

 

(

6

 

 

 

n

 

 

7.

 

.

 

 

 

 

6c

 

7

 

t

 

m)

 

 

o

 

 

 

2

 

 

 

 

 

1

 

 

 

 

 

m

 

 

(

8

 

 

a

 

 

 

2.

 

x.

 

 

 

 

9c

 

 

 

 

 

 

 

m)

 

2

4

)

 

 

 

 

 

c

m

 

 

 

 

 

 

 

 

 

 

 

(6

1

.0

 

 

 

 

 

 

 

 

 

 

 

 

 

or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

7”

)

 

 

 

 

 

 

c

m

 

 

 

 

 

(3

8

.6

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

)

 

 

 

 

 

 

 

m

 

 

 

 

 

 

(0 c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

(

0

 

 

 

 

 

 

 

7

 

 

mi

 

 

 

.

 

n.

 

 

6

2c

3

 

 

t

 

m)

 

 

 

o

 

6

 

 

 

 

(

 

 

 

 

 

 

 

 

m

 

9

 

 

 

a

 

 

1.

cx.

 

 

 

 

 

4

 

 

 

 

 

 

 

m)

 

 

 

 

 

 

 

 

maximum wall cabinet depth

must be 13” (33.0 cm) and wall

cabinets within this 6” (15.2 cm)

side clearance must be 18”

(45.7 cm) above the 36”

(91.4 cm) high countertop.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

in

.

 

 

 

 

 

 

 

 

 

 

 

8

 

)

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

1

 

.7c

 

 

 

 

6

 

 

 

 

 

 

5

 

 

 

3

m

)

 

 

 

(4

 

 

 

 

 

c

 

8

 

 

 

 

 

 

 

1

.4

 

3/

)

 

 

 

 

 

 

 

(9

 

 

cm

 

 

 

 

 

 

 

 

 

 

 

 

 

.95

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

6

 

 

 

 

(

 

 

 

 

 

mi

 

1

 

 

 

6

 

 

 

n

 

7.

 

.

 

 

 

6c

 

7

 

t

 

m)

 

 

o

 

 

2

 

 

 

 

 

(

 

 

 

 

 

m

 

 

1

 

 

 

 

8

 

 

a

 

 

2.

 

x.

 

 

 

9c

 

 

 

 

 

 

m)

 

 

30”

 

 

6

.2

c

m)

(7

 

 

 

 

 

 

 

 

 

 

 

6”

)

 

 

 

m

 

 

.2

c

 

 

5

 

 

 

 

(1

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

(

0

 

 

 

 

 

 

 

7

 

 

mi

 

 

 

.

 

n.

 

 

6

2c

3

 

 

t

 

m)

 

 

 

o

 

6

 

 

 

 

(

 

 

 

 

 

 

 

 

m

 

9

 

 

 

a

 

 

1.

 

 

 

 

 

 

 

4cx.

 

 

 

 

 

 

 

m)

Wall Installation

Note: Minimum clearance for back wall is 0” with backguard or high-shelf.

CAUTION

Burn hazard.

To avoid risk of personal injury; the use of cabinets for storage above the appliance may result

in a potential burn hazard. Combustible items may ignite, metallic items may become hot and cause burns. If a cabinet storage is to be provided the risk can be reduced by installing a rangehood that projects horizontally a minimum 5”

(12.7 cm) beyond the bottom of cabinets.

Note: Minimum clearance for back wall is 0” with backguard or high-shelf.

Note: If a range hood is installed, wall cabinets above the range have a different minimum clearance height.

Note: 6” (15.2 cm) min. with island trim and

Island Installationcombustible rear wall. 0” with island trim and non-combustible rear wall.

8

9

Page 5
Image 5
Viking F20495 manual Burn hazard

F20495 specifications

Viking F20495 is a remarkable entry in the realm of high-performance marine vessels, designed to cater to the needs of both commercial and recreational users. As a robust and versatile boat, it exemplifies the perfect blend of traditional craftsmanship and modern technology, making it an ideal choice for various marine activities.

One of the standout features of the Viking F20495 is its sturdy construction. Built with a high-quality fiberglass hull, it ensures durability and longevity while maintaining a lightweight profile. This construction method not only enhances performance on the water but also minimizes maintenance concerns, allowing users to focus on their adventures rather than repairs.

In terms of size, the F20495 measures an impressive 20 feet in length, providing ample space for passengers and gear. The design incorporates a spacious cockpit, ideal for fishing, leisure activities, or social gatherings. Its ergonomic layout ensures comfort and ease of movement, integral for those long jaunts at sea.

Equipped with advanced propulsion technology, the Viking F20495 can feature a powerful outboard engine that delivers exceptional speed and fuel efficiency. This engine configuration allows for improved maneuverability, essential for navigating both calm waters and challenging conditions.

The vessel is also designed with safety in mind. Features such as a deep V-hull provide stability and reduce the risk of capsizing, while high-quality railings and non-slip surfaces promote secure movement around the deck. Additionally, the inclusion of state-of-the-art navigation and communication systems ensures that users can maintain contact with shore and navigate with confidence, even in unfamiliar territories.

Interior features abound in the Viking F20495, with comfortable seating and ample storage designed to enhance the overall user experience. Cabin facilities are often included, offering shelter from the elements and making overnight trips more enjoyable.

In summary, Viking F20495 stands out as a high-performance vessel that offers a perfect combination of style, technology, and practicality. With its robust construction, powerful engine options, and user-friendly design, it caters to both novice and experienced marine enthusiasts alike, making it a superb choice for anyone looking to explore the waterways.