Viking F20495 manual Electrical Connection 3-wire Electrical Connection 4-wire

Electrical Connection (3-wire) (cont.)

4 5

Electrical Connection (4-wire)

Attach line #1 (red) and line #2 (black)	Push supply cord toward terminal
leads to outside terminal. Attach neutral wire (white)	block to relieve strain, reattach supply cord strain relief
to center terminal on the terminal block.	bracket over supply cord.

6

Reattach access door.

WARNING

Electrical shock hazard.

To avoid risk or electrical

shock, personal injury or death; grounding product to the frame

of the unit may or may not be permitted through your local codes. If ground to the frame is not permitted then a 4 conductor power cord must be used.

Use a 4-wire power supply cord kit rated for 40 amps – 125/250 volts with closed loop terminals and marked for use with ranges.

Do not use a GFI circuit. Where local codes do not permit grounding through neutral, use a 4-wire power supply cord. The cord or conduit must be secured to the range with the strain relief bracket.

The electrical connection is made at the terminal block, which is located behind the access door on the back of the range.

WARNING

Electrical shock hazard. To avoid risk of electrical shock,

personal injury or death; verify your appliance has been

properly grounded in accordance with local codes or in absence of codes, with the National Electrical Code (NEC). ANSI/NFPA 70-latest edition.

1

Remove access door.

2 3

Remove supply cord strain relief	Remove grounding screw. Cut-off
bracket and three supply cord mounting screws on	and discard ground strap.
the terminal block.

16 17