IMPORTANT–Read and Follow!
3
2
Table of Contents• Beforebeginning, please readthese
instructionscompletely andcarefully.
• Do not removepermanently affixedlabels,
warnings,or plates from product.This may
void thewarranty.
• All localand national codes andordinances
must be observed. Installationmust
conformwith local codes or in the absence
of codes,the National Fuel Gas CodeANSI
Z223.1INFPA54.
• The installermust leave theseinstructions
with theconsumer who should retainfor
local inspector’s use andfor future
reference.
In Canada:Installation must bein accordance
with thecurrent CAN/CGA B149.1& 2 Gas
Installationcodes and/or localcodes. Electrical
installationmust be in accordancewith the
currentCSA C22.1 Canadian Electrical Codes
Part 1 and/orlocal codes.
In Massachusetts: All gas productsmust be
installedby a “Massachusetts”licensed
plumberor gasfitter.A “T” type handle
manualvalve must be installedin the gas
supplyline to the appliance.
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. Always read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by
the safety alert symbol and the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:
Hazards or unsafe practices
which WILL result in severe personal
injury or death
DANGER
Hazards or unsafe practices
which COULD result in severe personal
injury or death
Hazards or unsafe practices which
COULD result in minor personal injury or
property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.
WARNING
CAUTION
Warnings & Important SafetyInstructions _______________________________________________3
Dimensions _________________________________________________________________________6
Specifications _______________________________________________________________________7
Clearance Dimensions (Proximity to Cabinets)___________________________________________8
Clearance Dimensions (Wood/Composite Overlay) ______________________________________9
Electrical & Gas Requirements _______________________________________________________10
General Information ________________________________________________________________12
Installation_________________________________________________________________________13
Door Removal __________________________________________________________________13
Leg Installation _________________________________________________________________14
Leveling/Adjustments/Alignment _________________________________________________15
Anti-tip Device Installation _______________________________________________________16
Connecting Gas & Electric _______________________________________________________17
Standoff Bracket Removal________________________________________________________18
Final Installation ________________________________________________________________18
Door Replacement and Adjustment _______________________________________________19
Final Preparation ___________________________________________________________________20
Performance Checklist ______________________________________________________________20
Service & Registration_______________________________________________________________21