Viking Sprinkler 11a specifications Approval Chart, Sprinkler 11d, Sprinklers, March 7

Sprinkler 11d March 7, 2008

MICROMATIC® AND

TECHNICAL DATA MicromaticHP® STANDARD

RESPONSE PENDENT

SPRINKLERS

The Viking Corporation, 210 N Industrial Park Road, Hastings MI 49058

Telephone: 269-945-9501 Technical Services 877-384-5464 Fax: 269-945-4495 Email: techsvcs@vikingcorp.com

Approval Chart 1

Micromatic® Standard Response Pendent Sprinklers

Maximum 175 PSI (12 bar) WWP

Sprinkler

Thread Size

Nominal

Overall

Listings and Approvals3

Base Part

SIN

K-Factor

Length

(Refer also to Design Criteria on page 11 g.)

Number1

NPT

BSP

U.S.

metric2

Inches

mm

cULus4

FM

NYC7

VdS

LPCB

Standard Orifice

10139

VK102

1/2”

15 mm

5.6

80.6

2-3/16”

56

B1, D5, E7, F4

A3, C6, F3

B1, D5, E7

B3

B3, D5

G312

G314,15

1017311

VK102

--

15 mm

5.6

80.6

2-3/16”

56

B1, D5, E7, F4

A3, C6, F3

B1, D5, E7

B3

B3, D5

--

--

Large Orifice

10223

VK202

1/2”

15 mm

8.0

115.2

2-3/8”

60

B1, D5, E7, F4

B4, D6, F4

B1, D5, E7

B3

--

--

--

10142

VK202

3/4”

20 mm

8.0

115.2

2-5/16”

59

B1, D5, E7, F4

B4, D6, F4

B1, D5, E7

--

B3, D5

G412

G414

10170

VK202

--

20 mm

8.0

115.2

2-3/8”

60

B1, D5, E7

C6, A4

--

--

B3, D5

G412

G414

12105

VK202

3/4”

20 mm

8.0

115.2

2-3/16”

56

--

--

--

B3

--

B313

--

Small Orifice9

1022110

VK003

1/2”

15 mm

2.8

40.3

2-3/16”

56

B1, D5, E7

B4, D6

--

--

--

--

--

1022210

VK004

1/2”

15 mm

4.2

60.5

2-1/4”

58

B1, D5, E7

--

--

--

B3, D5

--

--

10175

VK004

--

10 mm

4.2

60.5

2-1/4”

58

--

--

--

B3

B3, D5

G313

G314,15

1018910,11

VK003

--

15 mm

2.8

40.3

2-3/16”

56

B1, D5, E7

B4, D6

--

--

--

--

--

Approved Temperature Ratings

Approved Finishes

A - 135 °F (57 °C), 155 °F (68 °C), 175 °F (79 °C), 200 °F (93 °C), 212 °F (100 °C),

286 °F (141 °C), and 360 °F (182 °C)

1 - Brass, Chrome-Enloy®, White Polyester5,6, Black Polyester5,6, and Black Teflon®5

B - 135 °F (57 °C), 155 °F (68 °C), 175 °F (79 °C), 200 °F (93 °C), 286 °F

2 - White Polyester6, Black Polyester6, Black Teflon®, Wax-Coated Brass, and Wax

(141 °C), and 360 °F (182 °C)

over Polyester

C - 135 °F (57 °C), 155 °F (68 °C), 175 °F (79 °C), 200 °F (93 °C), and

3 - Brass, Chrome-Enloy®, White Polyester6, and Black Polyester6

212 °F (100 °C)

4 - Brass and Chrome-Enloy®

D - 135 °F (57 °C), 155 °F (68 °C), 175 °F (79 °C), and 200 °F (93 °C)

5 - Wax-Coated Brass and Wax Over Polyester5

E - 286 °F (141 °C)

6 - Wax-Coated Brass (corrosion resistant)

F - 500 °F (260 °C)8

7 - High Temperature 200 °F (93 °C) Wax Coating (corrosion resistant); maximum

G - 155 °F (68 °C), 175 °F (79 °C), 200 °F (93 °C), 286 °F (141 °C), and

ambient temperature allowed at ceiling = 150 °F (65 °C)

360 °F (182 °C)

Footnotes

1 Base part number is shown. For complete part number, refer to Viking’s current price schedule.

2 Metric K-factor shown is for use when pressure is measured in bar. When pressure is measured in kPa, divide the metric K-factor shown by 10.0.

3 This table shows the listings and approvals available at the time of printing. Check with the manufacturer for any additional approvals.

4 Listed by Underwriters Laboratories Inc. for use in the U.S. and Canada.

5 cULus Listed as corrosion resistant.

6 Other colors are available on request with the same Listings and Approvals as the standard colors.

7 Accepted for use, City of New York Department of Buildings, MEA Number 89-92-E, Vol. 12.

8 Sprinklers of Ultra-High temperature rating are intended for use inside ovens, dryers, or similar enclosures with normal operating temperatures above 300 °F (149 °C). Where the ambient temperature around the Ultra-High temperature rated sprinkler is significantly reduced below 300 °F (149 °C), the response time of the Ultra-High temperature rated sprinkler may be severely retarded.

9 Listings and Approvals limited to Light Hazard Occupancies where allowed by the installation standards being applied, with hydraulically calculated wet systems only. Exception: 4.2K sprinklers may be installed on hydraulically calculated dry pipe systems where piping is corrosion resistant or internally galvanized.

10The sprinkler orifice is bushed.

11Sprinklers 10173 and 10189 are available on special order.

12 Certified, Standard EN 12259-1, EC-certificate of conformity 0832-CPD-2001 and 0832-CPD-2003.

13 Certified, Standard EN 12259-1, EC-certificate of conformity 0786-CPD-40141 and 0786-CPD-40181.

14 MED Certified, Standard EN 12259-1, EC-certificate of conformity 0832-MED-1003 and 0832-MED-1008. 15 MED Certified, RINA Certificate No. MED497705C5.