Viking VIPR, VIDV, VEDV, DIPR warranty Installation Requirements, Utility Requirements

VENTILATION

Built-In VersaVent™ Rear Downdraft

Installation Requirements

VIPR Professional	VIPR Professional	DIPR Designer
Downdraft	Downdraft w/Remote	Downdraft w/Remote
	UTILITY REQUIREMENTS

DUCTING

•Check with a qualified and trained installer or local codes for makeup air requirements, if any.

•Max. duct run length (see Installation Notes & Accessories)

•For best performance, use the shortest length of ductwork and a minimum number of elbows.

•The system will operate most efficiently when the ductwork does not exceed 40’ of equivalent duct. For longer duct runs, increase duct size and contact a qualified and trained installer.

•Straight runs and gradual turns are best; for example, each 90° elbow is equivalent to 5’ – 10’ (152.4 – 304.8 cm) of straight run.

o6” or 10” round elbow= 6’ of straight duct

o3-1/4” x 10” to 6” round transition= 2’ of straight duct

o3-1/4” x 10” 90° elbow= 8’ of straight duct

•Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance.

GAS

• Not applicable

ELECTRICAL

• 2’-long power cord with 3- pronged plug included

•Internal blowers require a grounded outlet within reach of the power cord

•External blowers require direct

hardwiring with 2-wire with ground, using locally-supplied wire, and connected to the downdraft plug (included)

•120 VAC/60 Hz

•Max. amp usage (rating does not include recommended ventilator kit rating—See Installation Notes & Accessories)

PLUMBING

• Not applicable

Model

Ventilator Kits

InteriorExterior

Duct Size

InteriorExterior

Max. Amps

Interior Exterior

VIPR101	VIDV500	VEDV900	3–1/4” x 10” (8.3 x 25.4 cm)	10” (25.4 cm)	4.0	5.7
VIPR161	VIDV500	VEDV900	3–1/4” x 10” (8.3 x 25.4 cm)	10” (25.4 cm)	4.0	5.7
VIPR181	VIDV500	VEDV900/1200	3–1/4” x 10” (8.3 x 25.4 cm)	10” (25.4 cm)	4.0	5.7/3.0
VIPR101R	VIDV500	VEDV900	3–1/4” x 10” (8.3 x 25.4 cm)	10” (25.4 cm)	4.0	5.7
VIPR161R	VIDV500	VEDV900	3–1/4” x 10” (8.3 x 25.4 cm)	10” (25.4 cm)	4.0	5.7
VIPR181R	VIDV500	VEDV900/1200	3–1/4” x 10” (8.3 x 25.4 cm)	10” (25.4 cm)	4.0	5.7/3.0
DIPR100R	VIDV500	VEDV900	3–1/4” x 10” (8.3 x 25.4 cm)	10” (25.4 cm)	4.0	5.7
DIPR160R	VIDV500	VEDV900	3–1/4” x 10” (8.3 x 25.4 cm)	10” (25.4 cm)	4.0	5.7
DIPR150R	VIDV500	VEDV900	3–1/4” x 10” (8.3 x 25.4 cm)	10” (25.4 cm)	4.0	5.7

Note: Proper installation/ ducting is extremely important to ensure maximum performance. Use a qualified and trained installer.

P L A N N I N G A N D D E S I G N G U I D E	R E L E A S E D 1 2 / 1 / 0 7
V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1	© 2 0 0 7 V R C — INFORMATION SUBJECT TO CHANGE