Viper 1100.5 manual Features, „ Summed stereo full-range RCA output jacks

FEATURES

„Dual high-speed MOSFET switching power supplies.

„Complimentary bipolar outputs (ch 1-4), and high-current MOSFET outputs (sub channel).

„Five channel expandable architec- ture supports single or multiple amp system designs.

„Thermal, DC offset, reverse polarity, and short circuit protection with status LED.

„Top-mounted controls located under illuminated Viper snake logo trim piece.

„Dual continuously variable 12

dB/octave two-way active crossovers (ch 1-4).

„Continuously variable 24 dB/ octave low-pass crossover (sub channel).

„Variable 24 dB/octave subsonic filter and phase adjustment (sub channel).

„Remote subwoofer level control and variable 12 dB bass EQ function.

„Two, four, and six channel input allows full access to source or processor output functions.

„Master/slave function allows synced bridged or parallel operation with model d600.1.

„Summed stereo full-range RCA output jacks.

„Gold-plated screw-block plugs and RCA jacks ensure maximum signal transfer.

„Rugged one-piece extruded heat sink finished with injection-molded mounting feet.

WARNING

High-powered car audio systems may produce sound pressure levels that exceed the

threshold at which hearing loss may result.

They may also impair a driver’s ability to hear traffic sounds or emergency vehi- cles. Use common sense and practice safe listening habits when listening to or adjusting your audio system.

© 2002 Directed Electronics, Inc 5