USER MANUAL

ENGLISH

The humidity must be between 30% and 95%.

Do not use the machine as a means of transport.

Do not use the machine on slopes with a gradient exceeding the specifications.

In case of fire, use a powder fire extinguisher, not a water one.

Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.

Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep the openings free from dust, hairs and any other foreign material which could reduce the air flow.

Do not remove or modify the plates affixed to the machine.

If the machine is used according to the instructions, the vibrations are not dangerous. The machine vibration level is less than 2.5 m/s2 (98/37/EEC-EN 1033/1995).

This machine cannot be used on roads or public streets.

Pay attention during machine transportation when temperature is below freezing point. The water in the recovery tank or in the hoses could freeze and seriously damage the machine.

In case of machine malfunctions, ensure that these are not due to lack of maintenance. If necessary, request assistance from the authorised personnel or from an authorised Service Center.

If the machine

does not work properly

is damaged

has water or foam leaks

has been left outdoors exposed to bad weather conditions

is wet or has been dropped into water

turn it off immediately and contact VIPER Service Center or a qualified technician.

If parts must be replaced, require ORIGINAL spare parts from an Authorised Dealer or Retailer.

To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this Manual, must be performed by the authorised personnel or by an authorised Service Center.

If foam or liquid escapes from the appliance, switch off immediately.

Regularly clean the water level limiting device in accordance with instructions and examine it for signs of damage.

Carefully read all the instructions before performing any maintenance/repair procedure.

Do not wash the machine with direct or pressurized water jets, or with corrosive substances.

WARNING only use the accessory provide with the appliance, The use of other non original accessory may impair safety.

The machine must be disposed of properly, because of the presence of toxic-harmful materials (electrical components, etc.), which are subject to standards that require disposal in special centres (see Scrapping chapter).

GV12066(1)2009-01

GV25-EU GV35-EU GV702-EU

5

Page 6
Image 6
Viper GV35-EU, GV702-EU, GV25-EU user manual English