2b
2a
2d | 1b |
2c
STEP 3 | BLUE BAG |
•Lay the seatback (2a) face down. Mate the seatback support (2b) to 2a. Make sure the holes of 2b are pointing up towards the top of the seatback. Securely fasten four bolts (M10x1.5Px30L) into the seatback using a 6mm
•Bring the handle bars (2c) up to the
bottom of the rectangular seat support plate of 1b. Place a bolt (M10x1.5Px105L) and a flat (10.5x18x2T) washer horizontally through the seat support tube of 1b. Attach a flat (10.5x18x2T) washer and a nut (M6x1P). Leave loose.
•Drop 2 bolts (M10x1.5Px50L) vertically through the seat support tube of 1b. Attach two flat (10.5x18x2T) washers and two nuts (M10x1.5P). Tighten using a 6mm
•Lay the seat (2d) on top of the flat steel support of 1a. Make sure the rounded part of the seat is pointed towards the front. Securely fasten four bolts (M10x1.5Px30L) up into the seat using a 6mm
10