S T E P 7 B L A C K B A G
Q06
AC2
C09
Q05
Q04
Q03
B11
B09
•Loosely attach each of the two shield mounting brackets (B11) to the underside of the overhead lat arm (AC2) with two bolts (M5x10), two lock washers (5.1x9.3x1.3), and two flat washers (5.3x10x1)
•Align holes in rear shield (QO3) with the holes in the brackets (BO9 & B11) on the back side of the weight stack; loosely secure using 8 bolts (M5x10). Take the left (QO1) and right (QO2) side shields and repeat on front side of weight stack tower using five bolts (M5x10) for each shield. Tighten all bolts.
•Loosely mount the left (QO5) and right (QO6) covers to the brackets (C09) on the overhead lat arm (AC2) using three bolts (M5x10) and three flat washers (5.3x10x1) on each shield. Place the front shield (QO4) on front and mount using eight bolts (M5x10) and eight flat washers (5.3x10x1). The center holes on each side need a flat washer (5.3x10x1) and a nut (M5) attached on the inside of the shield. Tighten all bolts.
Q02
Q01
15
