S T E P 8 YELLOW BAG
AB1
B14
EC8
•Slide the thigh support post (AT4) into the seat support opening (AT1). Thread pull pin (T17) into hole on the front of the seat support (AT1) until it latches into place.
•Mount the seat onto the seat support using six bolts (M10x25).
•Attach the two bar storage snap hooks (B14) to the side of the weight stack tower (AB1) with four bolts (M5x15), four spring washers (5.1x9.3x1.3), and four flat washers (5.3x10x1).
•Attach the instructional placard (AG3) to the front of the upright frame by sliding a bolt (M10x75) and a flat washer (10.2x22x2) through the four holes. Fasten with another flat washer (10.2x22x2) and a nut (M10).
•Attach row handle (AE1) to the karabiner at the center of the upright frame. Attach the aluminum bar (EC8) to either the dual karabiners at the top or to the snap hooks (B14). The same can be done with the two
AG3
AT4
T17
AT1
AE1
16
