S T E P 2 | BLUE BAG |
• Attach two pulleys to the weight stack tower (AB1) with two bolts (M10x48), four flat washers (10.2x22x2), and two nuts (M10).
• Stand the weight stack tower (AB1) so that it is upright, and place it next to the center floor support (AG2). Attach the tower to the center floor support using two bolts (M10x70), four flat washers (10.2x22x2), and two nylon nuts (M10). Attach the connecting brace (AG1) from the weight stack tower to the main seat support. On the weight stack side, use two bolts (M10x60), four flat washers, (10.2x22x2), and two nylon nuts (M10) to secure. On other side of connecting brace, use two bolts (M10x120), four flat washers (10.2x22x2), and two nylon nuts (M10) to secure.
AB1
AG1
AG2
AC1
11
