-
9
-
4. Press the joystick up or down to adjust the date an d time. Press the
joystick left or right to adjust to the next settin g.
5. When finished, press the MENU button t o exit the menu.
Use the Date Stamp setting to imprint the date o n your pictures.
1. In the Date Time Setting menu. Make sure
the camera clock is set to the correct date.
2. Push the joystick left or right to select [Date
stamp] option.
3. Press the joystick to switch the Date stamp
function to on (tick on) or off (tick off).
4. Press the MENU button to exit the menu.
• Power Saving:
The camera will automatically power off approximately 3 minutes after you
do not perform any operation.
When this function is disabled, the power is not turned off automatically.