PROGRAMMING
The Vitamix XL™ Programmable is
that are optimized for a variety of applications. The programs can be customized by using a programming chip or programmer software kit available from Vitamix®. Call your distributor or Customer Service for more information.
Although your machine comes from the factory
Programming with a Custom Chip
1.Turn the power to the machine on using the On/Off switch located on the side of the machine.
2.Remove the container and locate the programming port which is on the side of the machine next to the On/Off switch. Insert the custom programmed chip with the silver contact bars and the words, “This Side Facing to the Front of the Machine” up into the port located below the label area.
3.Within 5 seconds, the six
4.Remove the programming chip, return it to the original package and store in a safe, easily accessible spot.
16 A | OFF ON |
Circuit Breaker On/Off Switch | Programming Port |
FIGURE A
Resetting Pre-Set Programs to Factory Settings
1.Turn the power to the machine off using the On/Off switch located on the side of the machine.
2.Hold down the pulse switch while turning the power back on using the On/Off switch.
IMPORTANT NOTES!
Programming Chip: If the above programming steps are taken and the custom programming does not appear with the first blend cycle, turn the chip
MACHINE ASSEMBLY
FIGURE A | FIGURE B | FIGURE C |
Lid Assembly
•To secure lid, place on top of container and gently press down until lid snaps into place, making sure the latches are secured around the top of the container rim.
•To remove a fully latched lid, lift one of the two tabs and pull upward and off.
•Twist the center lid plug to fasten or remove.
•The lid plug can be removed when using the accelerator tool or adding ingredients.
•To secure lid, place on top of container and gently press down until lid snaps into place, making sure the latches are secured around the top of the container rim.
•To remove a fully latched lid, lift one of the two tabs and pull upward and off.
•Twist the center lid plug to fasten or remove.
•Do not use with accelerator tool.
•To secure lid, place on top of container and gently press down until lid snaps into place, making sure the latches are secured around the top of the container rim.
•To remove a fully latched lid, lift one of the two tabs and pull upward and off.
•Twist the center lid plug to fasten or remove.
•The lid plug can be removed when using the accelerator tool or adding ingredients.
IMPORTANT NOTES!
Containers: Vitamix XL™ blenders are optimized for use with the 1.5 gal. / 5,6 L and Advance® 64 oz. / 2,0 L containers. Other Vitamix standard containers
(64 oz. / 2,0 L, 48 oz. / 1,5 L, or compact 32 oz. / 0,9 L) are not compatible. Call Vitamix Customer Service or your distributor for more information.
Lids: To make new lids easier to insert and remove, rub a light coating of cooking oil around the rim where it seals. Place it on a container for several minutes, remove and lightly wipe oil off lid.
12 | 13 |
