Vita-Mix BarBos MP owner manual Two-Part Lid, One Piece Lid optional

NOTE: Outside the United States and Canada, your machine may come with a different container configuration.

Two-Part Lid

32 oz. (900 ml) Xtreme Performance Container The two part lid is easy to clean and easy to put on, take off and seal.

•To remove a fully latched lid, lift the two tabs and pull upward and off.

•Twist the center lid plug to fasten or remove.

NOTE: Older 48 oz. (1.4 L) and 64 oz. (2.0 L) Vita-Mix container will work on the BarBoss or Drink Machine MP. The Xtreme Performance Containers will not work on older Vita-Mix Machines. Call Vita-Mix or your distributor for more information.

One Piece Lid (optional)

32 oz. (900 ml) Xtreme Performance Container The one piece lid is easy to clean and easy to put on, and take off and seal.

•There is no lid plug for this lid.

•Add ingredients through port on top.

To secure lid plug, rotate it so one tab locks between the stops on top of rubber lid

Lift lid tabs to remove lid

Figure A

Figure B

NOTE: To make new lids easier to insert and remove, rub a light coating of cooking oil around bottom where it seals. Place it in container for several minutes, remove and lightly wipe oil off lid.

5