M12 Cable Connector
M12 Cable Dimension (unit: mm) 
Components of the Waterproof Connector
Sealing Nut (A)
Seal (B)
Clamp Ring (C)
Gasket (D)
Plastic Nut (E)
Assembling Steps
1Prepare an Ethernet cable and strip part of the sheath.
4Insert the stripped Ethernet cable through the sealing nut and the clamp ring.
(A)
6Secure the sealing nut to the clamp ring tightly.
Ethernet Cable / | Wire Color |
M12 Cable |
|
1 | Orange/White |
2 | Orange |
3 | Green/White |
4 | Blue |
5 | Blue/White |
6 | Brown/White |
7 | Brown |
8 | Green |
2 Insert the seal into the clamp | 3 Insert the gasket into the clamp | ||||||||||||||||||||||
ring. |
| (C) | ring. | ||||||||||||||||||||
(B) |
|
|
|
|
|
|
|
|
| (D) | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ø4.5mm~Ø6.5mm
5Follow the pin definition in the below table
to solder the stripped Ethernet cable to the plastic nut.
(E)
7 Follow the pin definition in the below table to connect the Ethernet cable to the M12 cable and secure them tightly.
Ethernet Cable | M12 Cable |
EN - 6
