VIVOTEK - A Leading Provider of Multimedia Communication Solutions
IR cut filter
With a removable
■ Auto
The Network Camera automatically removes the filter by judging the level of ambient light.
■ Day mode
In day mode, the Network Camera switches on the IR cut filter at all times to block the infrared light from reaching the sensor so that the colors will not be distorted.
■ Night mode
In night mode, the Network Camera switches off the IR cut filter at all times for the sensor to accept the infrared light, thus helps improve low light sensitivity.
■ Schedule mode
The Network Camera switches between day mode and night mode based on specified schedule. Enter the starting time and ending time for the day mode. Note that the time format is [hh:mm] and is expressed in
Light sensor sensitivity
Select Low, Normal, or High for the light sensor sensibility.
Disable IR LED
If you don’t want to use IR illuminators, you can select this option to turn off.
Audio settings
Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that if mute mode is turned on, no audio data will be transmitted to all clients even though the audio transmission is enabled in the Client Settings page. In that case, the following message is displayed.
External microphone input: Select the gain of the external audio input according to ambient conditions. Adjust the gain from +21 db (most sensitive) ~
Audio type: Select audio codec AAC or
■AAC targets at performing good sound quality at the cost of higher bandwidth consumption. The bit rates are selectable at the following rates: 16Kbps, 32Kbps, 48Kbps, 64Kbps, 96Kbps and 128Kbps.
■
10.2Kbps and 12.2Kbps.
When completed with the settings on this page, click Save to take effect.
User's Manual - 59