![Wall mount with the bottom base](/images/new-backgrounds/48138/4813817x1.webp)
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Wall mount with the bottom base
1.Attach the supplied Alignment sticker to the wall.
2.Through the 10 circles on the sticker, drill 2 pilot holes symmetrically on each side into the wall. Then Hammer the supplied four plastic anchors into the holes.
3.Through four holes on the bottom base, insert the supplied four screws to corresponding holes and secure the bottom base with a screwdriver.
4.Feed the cables through hole A or B. If you want to use hole B, remove the rubber with a screwdriver.
5.Secure the camera base to the bottom base with supplied three screws.
1
3 2
4 | A |
|
B |
5
User's Manual - 9