Vivotek FD8361L manual Get SDP of Streams, Open the Network Stream

						VIVOTEK
ip	<ip address>		Single address: <ip address>
			Network address: <ip address / network mask>
			Range address:<start ip address - end ip address>
index	<value>		The start position to add or to delete.
return	<return page>		Redirect to the page <return page> after the parameter is assigned. The
			<return page> can be a full URL path or relative path according to the current
			path. If you omit this parameter, it will redirect to an empty page.
s<0~(m-1)>_h264		0~2		4/4	0	=> Baseline profile
_profile					1	=> Main profile
					2	=> High profile

Get SDP of Streams

Note: This request requires Viewer access privileges.

Method: GET/POST

Syntax:

http://<servername>/<network_rtsp_s<0~m-1>_accessname>

“m” is the stream number.

“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the “subgroup of network: rtsp” for setting the accessname of SDP.

You can get the SDP by HTTP GET.

Open the Network Stream

Note: This request requires Viewer access privileges.

Syntax:

For HTTP push server (MJPEG):

http://<servername>/<network_http_s<0~m-1>_accessname>

For RTSP (MP4), the user needs to input the URL below into an RTSP compatible player.

rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>

“m” is the stream number.

For details on streaming protocol, please refer to the “control signaling” and “data format” documents.

User's Manual - 149