Multi Control Available Modes, ID Setup, ID Input | Samsung 650FP-2

Multi Control

Adjusting the LCD Display

→, → ENTER

Multi Control

Available Modes

• PC / DVI / BNC

• AV

• Component

• HDMI

• MagicInfo

Note

•MagicInfo can only be enabled when a network box is connected.

•The HDMI port and network box cannot be connected at the same time.

Multi Control

Assigns an individual ID to the SET.

MENU → → → → → ENTER → → ENTER

→ , → [0~9]

•ID Setup

Assigns distinctive IDs to the SET.

•ID Input

Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.

Image 91

Samsung 650FP-2, 650MP-2 Multi Control Available Modes, ID Setup, ID Input, PC / DVI / BNC AV Component HDMI MagicInfo

Contents

LCD Display SyncMaster 650MP-2, 650FP-2User Manual Warning / Caution Safety InstructionsPower Notational Installation Clean Connections Connecting a Computer Others Otherwise, this may result in an explosion or fire Set a resolution and frequency appropriate to the productWhen using headphones or earphones, do not turn the volume too high This may result in a product malfunction, electric shock, or fire This reduces eye fatigue When replacing the battery, insert it with the right polarity +The product may fall and cause personal injury or death Otherwise, it may fall and result in personal injury This may reduce the lifetime of the product, and may result in fireDo not use a humidifier near the product If a spark occurs, it may cause an explosion or fire Unpacking Package ContentsChecking the Contents of the Package Introduction Sold separately ManualsCables Others MENU button MENU Adjust buttons Left-Right buttons / Volume buttonsYour LCD Display Front Ferrite Core Rear Power buttonPower indicator Remote Control Sensor RGB IN PC Connection Terminal In- put POWER S/W ON / OFF OPOWER RS232C OUT/IN RS232C Serial PORT AV IN VIDEO DVI/RGB/HDMI AUDIO IN PC/DVI/ HDMI Audio Connection Terminal InputAV/COMPONENT AUDIO IN R-AUDIO L DVI OUT BNC OUT R, G, B, H, V BNC Terminal Output Remote ControlSBB Lcok 6. SOURCE 1. POWER 2. OFF 3. Number Buttons 4. DEL / GUIDE but- ton 5. - VOL +POWER OFF Number Buttons DEL / GUIDE button - VOL + SOURCE D.MENU Press the button to change the input signal SOURCE You can select MTS Multichannel Television Stereo mode DUAL Mechanical Layout Mechanical Layout Installation VESA Bracket Components DimensionsWall Bracket Installation Wall Bracket Assembly Hinge Left Introduction There are two hingesleft and right. Use the correct oneCaptive Screw Wall Bracket To mount the product on the wall bracket Wall Bracket Angle Adjustment Introduction Connections Connecting AV Devices Connecting to Other devices Connecting the BNC to BNC cable Connecting to a Camcorder Connecting Using a HDMI Cable Connecting Using a DVI Cable Connecting a DVD Player Connecting Using a DVI to HDMI Cable Connecting a DTV Set Top Cable/Satellite Box Connecting to an Audio System Installation Problems MDC Multiple Display Control InstallationUninstall Main Screen Introduction Select Button Port SelectionSafety Lock Main Icons Power Control 1 Power Status 2 Input 3 Image Size 4 On Timer 5 Off Timer Info Grid shows some basic information necessary to Power Control The Power Control feature is available for all displays Input Source PC Mode Image Size PC, BNC, DVI The Input source of MagicInfo works only on MagicInfo model Image Size TV, AV, S-Video, Component, DVIHDCP, HDMI, DTVThe Input source of TV works only on TV model The Auto Wide mode is available only for TV, AV, and S-Video Time At On Time Setup, TV Source functions only for TV Model PIP PIP SizeAt On Time Setup, MagicInfo Source functions only for MagicInfo Model PIP Size can be controlled with turning on the LCD Display power PIP PIP Source Settings Picture Color Temp is only enabled if the Color Tone is set to Off Settings Picture PC Settings Audio The Input source of MagicInfo works only on MagicInfo model Image Lock Maintenance Lamp Control Maintenance Scroll Maintenance Video Wall z Select a display from Display Selection z The place will be set up by pressing a number in the selected mode1 Video Wall 2 Video Wall Screen divider The screen can be divided into Settings Value Display In Multiple Display Mode TroubleshootingYou may not operate this function in MagicInfo Page PC / DVI / BNC AV Component HDMI MagicInfo Adjusting the LCD DisplayInput Available Modes Source List Off On Source Size SwapPosition Edit Name TransparencyHigh Medium Low Opaque 2. Internet Picture PC / DVI / BNC / MagicInfo Mode Available ModesMagicBright 1. Entertain 2. Brightness Custom4. Custom 1. Contrast 1. Red Color ToneColor Control 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Fine Color TempImage Lock Coarse Signal Balance Auto Adjustment 3. B-Gain Signal Control1. R-Gain 2. G-Gain 6. B-Offset HDMI Black Level 1. Normal 2. Low PIP Picture4. Color 1. Off 2. On Dynamic ContrastLamp Control 5. Tint Picture AV / HDMI / Component Mode Available Modes Brightness SensorMode 2. Standard 3. Movie 4. Custom ContrastBrightness Dynamic, Standard, Movie, or Custom can be activated 1. Dynamic 1. Off 2. Cool2 SharpnessColor Tint 3. Cool1 4. Normal 5. Warm1 6. Warm2 Digital NR Digital Noise Reduction Film Mode 1. Off 2. On Sound Available Modes 1. Standard BassTreble Balance SRS TS XT Auto VolumeSound Select 1. Internal Setup Available ModesSpeaker Select 1. Main 2. Sub HDMI MagicInfo LanguageTime Clock Set 1. Off Sleep TimerOn Timer Off Timer Menu Transparency Safety Lock Change PIN1. High 2. Medium 3. Low 4. Opaque Energy Saving LockVideo Wall 2. Natural FormatHorizontal 1. Full Vertical Safety ScreenScreen Divider Pixel Shift Pixel Shift 1. Scroll Timer Timer Mode-Scroll 1~5 sec Mode-Bar, Eraser 10~50 sec PeriodScroll 2. Bar 3. Eraser 1. Off 2. Light 3. Dark Resolution SelectEraser Side Gray 1. Off 2. 1024 X 3. 1280 X 4. 1360 x 5. 1366 X Power On Adjustment OSD Rotation ResetImage Reset Color Reset ID Input ID SetupMulti Control Available Modes Multi Control MagicInfo Available Modes MagicInfo Adjusting the LCD Display 3. Select Language - step Shows the settings that have been selected by the user Warning Messages TroubleshootingSelf-Test Feature Check Maintenance and Cleaning Problems related to the Installation PC Mode Symptoms and Recommended ActionsCheck List Q Check Signal Cable message Problems related to the ScreenQ Not Optimum Mode message Problems related to the Remote Control Problems related to Audio Q & A Troubleshooting Power Supply SpecificationsResolution Input Signal, Terminated Plug and Play Capability PowerSaverVESA Mounting Interface Environmental considerations Preset Timing Modes Vertical Frequency Horizontal Frequency PRODUCT INFORMATION Image Retention Free What is Image Retention ?Information For a Better Display Change the Color Information periodically Power Off, Screen Saver, or Power Save ModeInformation Apply the Screen Scroll function on Product Change the characters color periodicallyApply the Screen Pixel function on Product Apply the Screen Bar function Apply the Screen Erasing function on ProductSymptom Horizontal / Vertical Bar with Black Color move up and down Symptom 2 Vertical blocks move while erasing the display Latin America AppendixContact SAMSUNG WORLDWIDE North America Europe Asia Pacific Middle East TermsAfrica Information in this document is subject to change without notice Correct DisposalAuthority Correct disposal of batteries in this product - Europe only Appendix