Safety Instructions, Notational, Power | Samsung 650MP-2, 650FP-2

Safety Instructions

Safety Instructions

Notational

Note

These safety instructions must be followed to ensure your safety and prevent property dam- age.

Make sure to read the instructions carefully and use the product in the correct manner.

Warning / Caution

Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.

Note

Prohibited

Do not disassemble

Do not touch

Important to read and under- stand at all times

Disconnect the plug from the outlet

Ground to prevent an electric shock

Power

When not used for extended period of time, set your computer to DPM.

If using a screen saver, set it to active screen mode.

The images here are for reference only, and are not applicable in all cases (or countries).

Shortcut to Anti-Afterimage Instructions

Do not use a damaged power cord or plug or a damaged or loose power outlet.

•Otherwise, this may result in electric shock or fire.

Do not touch the power plug with wet hands when removing or plugging the plug into the outlet.

•Otherwise, this may result in electric shock.

Make sure to connect the power cord to a grounded power out- let.

•Otherwise, it may result in electric shock or personal injury.

Image 2

Samsung 650MP-2, 650FP-2 user manual Safety Instructions, Notational, Power, Warning / Caution

Contents

User Manual SyncMaster 650MP-2, 650FP-2LCD Display Notational Safety InstructionsPower Warning / Caution Installation Clean Connecting a Computer Connections Others This may result in a product malfunction, electric shock, or fire Set a resolution and frequency appropriate to the productWhen using headphones or earphones, do not turn the volume too high Otherwise, this may result in an explosion or fire The product may fall and cause personal injury or death When replacing the battery, insert it with the right polarity +This reduces eye fatigue If a spark occurs, it may cause an explosion or fire This may reduce the lifetime of the product, and may result in fireDo not use a humidifier near the product Otherwise, it may fall and result in personal injury Introduction Package ContentsChecking the Contents of the Package Unpacking Others ManualsCables Sold separately Ferrite Core Adjust buttons Left-Right buttons / Volume buttonsYour LCD Display Front MENU button MENU Remote Control Sensor Power buttonPower indicator Rear RS232C OUT/IN RS232C Serial PORT POWER S/W ON / OFF OPOWER RGB IN PC Connection Terminal In- put DVI OUT DVI/RGB/HDMI AUDIO IN PC/DVI/ HDMI Audio Connection Terminal InputAV/COMPONENT AUDIO IN R-AUDIO L AV IN VIDEO SBB Lcok Remote ControlBNC OUT R, G, B, H, V BNC Terminal Output Press the button to change the input signal SOURCE 1. POWER 2. OFF 3. Number Buttons 4. DEL / GUIDE but- ton 5. - VOL +POWER OFF Number Buttons DEL / GUIDE button - VOL + SOURCE D.MENU 6. SOURCE DUAL You can select MTS Multichannel Television Stereo mode Mechanical Layout Mechanical Layout Installation VESA Bracket Wall Bracket Assembly DimensionsWall Bracket Installation Components Wall Bracket Introduction There are two hingesleft and right. Use the correct oneCaptive Screw Hinge Left To mount the product on the wall bracket Wall Bracket Angle Adjustment Introduction Connections Connecting to Other devices Connecting AV Devices Connecting to a Camcorder Connecting the BNC to BNC cable Connecting Using a DVI Cable Connecting Using a HDMI Cable Connecting Using a DVI to HDMI Cable Connecting a DVD Player Connecting a DTV Set Top Cable/Satellite Box Connecting to an Audio System Uninstall MDC Multiple Display Control InstallationInstallation Problems Introduction Main Screen Main Icons Port SelectionSafety Lock Select Button Power Control Info Grid shows some basic information necessary to Power Control 1 Power Status 2 Input 3 Image Size 4 On Timer 5 Off Timer Input Source The Power Control feature is available for all displays PC Mode Image Size PC, BNC, DVI The Input source of TV works only on TV model Image Size TV, AV, S-Video, Component, DVIHDCP, HDMI, DTVThe Input source of MagicInfo works only on MagicInfo model Time The Auto Wide mode is available only for TV, AV, and S-Video At On Time Setup, MagicInfo Source functions only for MagicInfo Model PIP PIP SizeAt On Time Setup, TV Source functions only for TV Model PIP PIP Source PIP Size can be controlled with turning on the LCD Display power Settings Picture Settings Picture PC Color Temp is only enabled if the Color Tone is set to Off Settings Audio The Input source of TV works only on TV model Maintenance Lamp Control Image Lock Maintenance Scroll Maintenance Video Wall 2 Video Wall Screen divider The screen can be divided into z The place will be set up by pressing a number in the selected mode1 Video Wall z Select a display from Display Selection You may not operate this function in MagicInfo TroubleshootingSettings Value Display In Multiple Display Mode Page Source List Adjusting the LCD DisplayInput Available Modes PC / DVI / BNC AV Component HDMI MagicInfo Source Off On Position SwapSize High Medium Low Opaque TransparencyEdit Name 1. Entertain Picture PC / DVI / BNC / MagicInfo Mode Available ModesMagicBright 2. Internet 1. Contrast Custom4. Custom 2. Brightness 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Color ToneColor Control 1. Red Coarse Color TempImage Lock Fine Auto Adjustment Signal Balance 2. G-Gain Signal Control1. R-Gain 3. B-Gain HDMI Black Level 6. B-Offset 4. Color PIP Picture1. Normal 2. Low 5. Tint Dynamic ContrastLamp Control 1. Off 2. On Mode Brightness SensorPicture AV / HDMI / Component Mode Available Modes Dynamic, Standard, Movie, or Custom can be activated 1. Dynamic ContrastBrightness 2. Standard 3. Movie 4. Custom Tint SharpnessColor 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Digital NR Digital Noise Reduction Film Mode 3. Sharpness Sound Available Modes Balance BassTreble 1. Standard Sound Select Auto VolumeSRS TS XT 1. Main 2. Sub Setup Available ModesSpeaker Select 1. Internal Clock Set LanguageTime HDMI MagicInfo Off Timer Sleep TimerOn Timer 1. Off 1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PINMenu Transparency Video Wall LockEnergy Saving 1. Full FormatHorizontal 2. Natural Screen Divider Safety ScreenVertical Pixel Shift Pixel Shift Timer Timer 1. Scroll 2. Bar 3. Eraser PeriodScroll Mode-Scroll 1~5 sec Mode-Bar, Eraser 10~50 sec Side Gray Resolution SelectEraser 1. Off 2. Light 3. Dark Power On Adjustment 1. Off 2. 1024 X 3. 1280 X 4. 1360 x 5. 1366 X Color Reset ResetImage Reset OSD Rotation Multi Control ID SetupMulti Control Available Modes ID Input MagicInfo Available Modes MagicInfo Adjusting the LCD Display 3. Select Language - step Shows the settings that have been selected by the user Maintenance and Cleaning TroubleshootingSelf-Test Feature Check Warning Messages Check List Symptoms and Recommended ActionsProblems related to the Installation PC Mode Q Not Optimum Mode message Problems related to the ScreenQ Check Signal Cable message Problems related to Audio Problems related to the Remote Control Q & A Troubleshooting Input Signal, Terminated SpecificationsResolution Power Supply Environmental considerations PowerSaverVESA Mounting Interface Plug and Play Capability Preset Timing Modes Horizontal Frequency Vertical Frequency For a Better Display What is Image Retention ?Information PRODUCT INFORMATION Image Retention Free Information Power Off, Screen Saver, or Power Save ModeChange the Color Information periodically Apply the Screen Pixel function on Product Change the characters color periodicallyApply the Screen Scroll function on Product Symptom 2 Vertical blocks move while erasing the display Apply the Screen Erasing function on ProductSymptom Horizontal / Vertical Bar with Black Color move up and down Apply the Screen Bar function North America AppendixContact SAMSUNG WORLDWIDE Latin America Europe Asia Pacific Africa TermsMiddle East Correct disposal of batteries in this product - Europe only Correct DisposalAuthority Information in this document is subject to change without notice Appendix