Connections | Samsung 650FP-2, 650MP-2 manual

Connections

Connections

Using the HDMI (digital) output on the graphics card.

•Connect the [HDMI IN] port on the LCD Display to the HDMI port on the PC using the HDMI cable.

Note

When the HDMI cable to the PC, ensure that you select HDMI from both the Source List and Edit Name before selecting PC or DVI device so that normal PC screen and sound can be outputted. Note that sound is only

available when connected according to the option that follows. Using the BNC (Analog) connector on the video card.

•Connect the [BNC/COMPONENT IN] port on the monitor to the BNC port on the PC using the BNC to BNC cable.

Image 25

Samsung 650FP-2, 650MP-2 user manual Connections

Contents

LCD Display SyncMaster 650MP-2, 650FP-2User Manual Power Safety InstructionsNotational Warning / Caution Installation Clean Connections Connecting a Computer Others When using headphones or earphones, do not turn the volume too high Set a resolution and frequency appropriate to the productThis may result in a product malfunction, electric shock, or fire Otherwise, this may result in an explosion or fire This reduces eye fatigue When replacing the battery, insert it with the right polarity +The product may fall and cause personal injury or death Do not use a humidifier near the product This may reduce the lifetime of the product, and may result in fireIf a spark occurs, it may cause an explosion or fire Otherwise, it may fall and result in personal injury Checking the Contents of the Package Package ContentsIntroduction Unpacking Cables ManualsOthers Sold separately Your LCD Display Front Adjust buttons Left-Right buttons / Volume buttonsFerrite Core MENU button MENU Power indicator Power buttonRemote Control Sensor Rear POWER POWER S/W ON / OFF ORS232C OUT/IN RS232C Serial PORT RGB IN PC Connection Terminal In- put AV/COMPONENT AUDIO IN R-AUDIO L DVI/RGB/HDMI AUDIO IN PC/DVI/ HDMI Audio Connection Terminal InputDVI OUT AV IN VIDEO BNC OUT R, G, B, H, V BNC Terminal Output Remote ControlSBB Lcok POWER OFF Number Buttons DEL / GUIDE button - VOL + SOURCE D.MENU 1. POWER 2. OFF 3. Number Buttons 4. DEL / GUIDE but- ton 5. - VOL +Press the button to change the input signal SOURCE 6. SOURCE You can select MTS Multichannel Television Stereo mode DUAL Mechanical Layout Mechanical Layout Installation VESA Bracket Wall Bracket Installation DimensionsWall Bracket Assembly Components Captive Screw Introduction There are two hingesleft and right. Use the correct oneWall Bracket Hinge Left To mount the product on the wall bracket Wall Bracket Angle Adjustment Introduction Connections Connecting AV Devices Connecting to Other devices Connecting the BNC to BNC cable Connecting to a Camcorder Connecting Using a HDMI Cable Connecting Using a DVI Cable Connecting a DVD Player Connecting Using a DVI to HDMI Cable Connecting a DTV Set Top Cable/Satellite Box Connecting to an Audio System Installation Problems MDC Multiple Display Control InstallationUninstall Main Screen Introduction Safety Lock Port SelectionMain Icons Select Button Power Control 1 Power Status 2 Input 3 Image Size 4 On Timer 5 Off Timer Info Grid shows some basic information necessary to Power Control The Power Control feature is available for all displays Input Source PC Mode Image Size PC, BNC, DVI The Input source of MagicInfo works only on MagicInfo model Image Size TV, AV, S-Video, Component, DVIHDCP, HDMI, DTVThe Input source of TV works only on TV model The Auto Wide mode is available only for TV, AV, and S-Video Time At On Time Setup, TV Source functions only for TV Model PIP PIP SizeAt On Time Setup, MagicInfo Source functions only for MagicInfo Model PIP Size can be controlled with turning on the LCD Display power PIP PIP Source Settings Picture Color Temp is only enabled if the Color Tone is set to Off Settings Picture PC Settings Audio The Input source of MagicInfo works only on MagicInfo model Image Lock Maintenance Lamp Control Maintenance Scroll Maintenance Video Wall 1 Video Wall z The place will be set up by pressing a number in the selected mode2 Video Wall Screen divider The screen can be divided into z Select a display from Display Selection Settings Value Display In Multiple Display Mode TroubleshootingYou may not operate this function in MagicInfo Page Input Available Modes Adjusting the LCD DisplaySource List PC / DVI / BNC AV Component HDMI MagicInfo Off On Source Size SwapPosition Edit Name TransparencyHigh Medium Low Opaque MagicBright Picture PC / DVI / BNC / MagicInfo Mode Available Modes1. Entertain 2. Internet 4. Custom Custom1. Contrast 2. Brightness Color Control Color Tone1. Off 2. Cool 3. Normal 4. Warm 5. Custom 1. Red Image Lock Color TempCoarse Fine Signal Balance Auto Adjustment 1. R-Gain Signal Control2. G-Gain 3. B-Gain 6. B-Offset HDMI Black Level 1. Normal 2. Low PIP Picture4. Color Lamp Control Dynamic Contrast5. Tint 1. Off 2. On Picture AV / HDMI / Component Mode Available Modes Brightness SensorMode Brightness ContrastDynamic, Standard, Movie, or Custom can be activated 1. Dynamic 2. Standard 3. Movie 4. Custom Color SharpnessTint 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Digital NR Digital Noise Reduction Film Mode Lamp Control Sound Available Modes Treble BassBalance 1. Standard SRS TS XT Auto VolumeSound Select Speaker Select Setup Available Modes1. Main 2. Sub 1. Internal Time LanguageClock Set HDMI MagicInfo On Timer Sleep TimerOff Timer 1. Off Menu Transparency Safety Lock Change PIN1. High 2. Medium 3. Low 4. Opaque Energy Saving LockVideo Wall Horizontal Format1. Full 2. Natural Vertical Safety ScreenScreen Divider Pixel Shift Pixel Shift 1. Scroll Timer Timer Scroll Period2. Bar 3. Eraser Mode-Scroll 1~5 sec Mode-Bar, Eraser 10~50 sec Eraser Resolution SelectSide Gray 1. Off 2. Light 3. Dark 1. Off 2. 1024 X 3. 1280 X 4. 1360 x 5. 1366 X Power On Adjustment Image Reset ResetColor Reset OSD Rotation Multi Control Available Modes ID SetupMulti Control ID Input MagicInfo Available Modes MagicInfo Adjusting the LCD Display 3. Select Language - step Shows the settings that have been selected by the user Self-Test Feature Check TroubleshootingMaintenance and Cleaning Warning Messages Problems related to the Installation PC Mode Symptoms and Recommended ActionsCheck List Q Check Signal Cable message Problems related to the ScreenQ Not Optimum Mode message Problems related to the Remote Control Problems related to Audio Q & A Troubleshooting Resolution SpecificationsInput Signal, Terminated Power Supply VESA Mounting Interface PowerSaverEnvironmental considerations Plug and Play Capability Preset Timing Modes Vertical Frequency Horizontal Frequency Information What is Image Retention ?For a Better Display PRODUCT INFORMATION Image Retention Free Change the Color Information periodically Power Off, Screen Saver, or Power Save ModeInformation Apply the Screen Scroll function on Product Change the characters color periodicallyApply the Screen Pixel function on Product Symptom Horizontal / Vertical Bar with Black Color move up and down Apply the Screen Erasing function on ProductSymptom 2 Vertical blocks move while erasing the display Apply the Screen Bar function Contact SAMSUNG WORLDWIDE AppendixNorth America Latin America Europe Asia Pacific Middle East TermsAfrica Authority Correct DisposalCorrect disposal of batteries in this product - Europe only Information in this document is subject to change without notice Appendix