Vivotek FD8361L manual 2010/10/30

VIVOTEK

2010/10/30 13:44:17

White balance: Adjust the value for the best color temperature�

■ Auto

The Network Camera automatically adjusts the color temperature of the light in response to different light sources� The white balance setting defaults to Auto and works well in most situations�

■ Keep current value

Follow the steps below to manually set the white balance to compensate for the ambient lighting conditions�

1� Set the White balance to Auto and click Save�

2� Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color temperature automatically�

3.Select Keep Current Value to confirm the setting while the white balance is being measured.

4� Click Save to enable the new setting�

Image Adjustment

■Brightness: Adjust the image brightness level, which ranges from -5 to +5.

■Saturation: Adjust the image saturation level, which ranges from -5 to +5.

■Contrast: Adjust the image contrast level, which ranges from -5 to +5.

■Sharpness: Adjust the image sharpness level, which ranges from -5 to +5.

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes� When completed with the settings on this page, click Save to enable the setting and click Close to exit the page�

58 - User's Manual