Vivotek FD8371EV user manual IR cut control, Image setting per channel

VIVOTEK

7.10 IR cut control

Group: ircutcontrol (capability.nvideoinprofile > 0)

NAME		VALUE		DEFAULT		SECURITY		DESCRIPTION
						(get/set)
mode		auto,		auto	1/6			Set IR cut control mode
		day,
		night,
		di,
		schedule
		<product
		dependent>
daymodebegintime	00:00~23:59		07:00		6/6			Day mode begin time
daymodeendtime	00:00~23:59		18:00		6/6			Day mod end time
bwmode	<boolean>		1		1/6		Switch to B/W in night mode if
								enabled
sensitivity		low,		normal	1/6			Sensitivity of light sensor
		normal,
		high

7.11 Image setting per channel

Group: image_c<0~(n-1)>for n channel products

NAME		VALUE		DEFAULT		SECURITY		DESCRIPTION
						(get/set)
brightnesspercent	0~100		0		4/4			Adjust brightnesspercent of
								image
saturationpercent	0~100		50		4/4			Adjust saturation value of
							percentage when
							saturation=100
contrastpercent	0~100		50		4/4			Adjust contrastpercent of image
sharpnesspercent	0~100		50		4/4			Adjust sharpness value of
								percentage when
								sharpness=100
dnr_mode	0~1		0		4/4		0:disable
								1:enable
dnr_strength	0~2		1		4/4			Strength of DNR
profile_i0_enable		<boolean>	0		4/4			Enable/disable this profile setting
profile_i0_policy		day,		night	4/4			The mode which the profile is

User's Manual - 159