VIVOTEK
Installation
Removing Dome Cover
First, use the included T20 hex key wrench to loose the four screws and detach the dome
cover from the camera base. Follow the steps below to install the camera either to a ceiling
or a wall.
IMPORTANT:
The dome cover should be removed first because if it should fall during the installation process, physical injury could occur to your
Top View | Dome Cover |
|
Dome Cover Retainer
Cabling Assembly
Connect power lines and if you have external devices such as sensors and alarms, make the connection from the general I/O terminal block.
Top View
Power and IO cables pass through a waterproof connector. The Ethernet cable should be routed through a rubber seal plug. All cables are user- supplied.
For Ethernet Cable For Power & IO Cables
10 - User's Manual
