VIVOTEK
Connecting RJ45 Ethernet Cable
RJ45 Cable Dimension (unit: mm)
Recommended cable gauge: 24AWG (0.51 mm)
Assembling Steps
1 | Rubber Seal | |
Plug | ||
|
1.Drill a hole on the rubber seal plug and insert an Ethernet cable through the opening.
2.Strip part of the sheath from the Eth- ernet cable.
2
3
o:white/orange stripe O: orange solid
g:white/green stripe B: blue solid
b:white/blue stripe G: green solid
br: white/brown stripe
BR: brown solid
o
O g
B b
G br
BR
1
2
3
4
5
6
7
8
3.You will need an RJ45 crimping tool to attach the Ethernet wires to a connector. When done, connect the cable to the camera’s Ethernet RJ45 socket.
4
4. Press the Ethernet cable into the routing path at the bottom of the camera so that the cable will not get in the way when the metal mounting plate is attached.
User's Manual - 13
