VIVOTEK
Connecting RJ45 Ethernet Cable
RJ45 Cable Dimension (unit: mm) | 1 |
|
Recommended cable gauge: 5 to 8mm
Assembly Steps
1.Drill a hole on the rubber seal plug and insert an Ethernet cable through the opening.
2.Strip part of the sheath from the Ether- net cable.
3
Rubber Seal Plug
2
o:white/orange stripe O: orange solid
g:white/green stripe B: blue solid
b:white/blue stripe G: green solid
br: white/brown stripe
BR: brown solid
o
O g
B b
G br
BR
1
2
3
4
5
6
7
8
3.You will need an RJ45 crimping tool to attach the Ethernet wires to a connec- tor. When done, connect the cable to the camera’s Ethernet RJ45 socket.
4 | 4.Feed the Ethernet cable from the bottom of the |
| |
| camera and through the hole. Attach the rubber |
| seal plug for water proofing. |
1
2
Connecting DC Power Cable
1. Add the supplied rubber washer to the cable as shown in the picture.
2. Feed the cable from the bottom of the cam- era and tighten the plastic base for water- proofing.
NOTE:
Connect the supplied power & IO cables if your switch does not support PoE.
10 - User's Manual
