VIVOTEK

Using 3GPP-compatible Mobile Devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet. For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 15.

To utilize this feature, please check the following settings on your Network Camera:

1.Because most players on 3GPP mobile phones do not support RTSP authentication, make sure the authentication mode of RTSP streaming is set to disable.

For more information, please refer to RTSP Streaming on page 78.

2.As the the bandwidth on 3G networks is limited, you will not be able to use a large video size.

Please set the video and audio streaming parameters as listed below.

For more information, please refer to Stream settings on page 63.

Video Mode

MPEG-4

Frame size

176 x 144

Maximum frame rate

5 fps

Intra frame period

1S

Video quality (Constant bit rate)

40kbps

Audio type (GSM-AMR)

12.2kbps

3.As most ISPs and players only allow RTSP streaming through port number 554, please set the RTSP port to 554. For more information, please refer to RTSP Streaming on page 78.

4.Launch the player on the 3GPP-compatible mobile devices (e.g., Real Player).

5.Type the following URL commands in the URL field.

The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming access name for stream 3>.

For example:

rtsp://192.168.5.151:554/live.sdp

User's Manual - 25

Page 25
Image 25
Vivotek FE8174V user manual Using 3GPP-compatible Mobile Devices, MPEG-4