Vivotek IP8161 manual Drive the Digital Output

VIVOTEK

Group: eptz_c<0~(n-1)>_s<0~(m-1)>for n channel product. and m is the number of streams which support ePTZ.

PARAMETER	VALUE	SECURITY	DESCRIPTION
		(get/set)
patrolseq	string[120]	1/4	The indexes of patrol points, separated by “,”
patroldwelling	string[160]	1/4	The dwelling time of each patrol point, separated by “,”
i<0~19>_name	string[40]	1/7	Name of ePTZ preset.
			(It should be set by eCamCtrl.cgi rather than by
			setparam.cgi.)
i<0~19>_pos	<coordinate>	1/7	Left-top corner coordinate of the preset.
			(It should be set by eCamCtrl.cgi rather than by
			setparam.cgi.)
i<0~19>_size	<window size>	1/7	Width and height of the preset.
			(It should be set by eCamCtrl.cgi rather than by
			setparam.cgi.)

Drive the Digital Output

Note: This request requires Viewer privileges.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>] [&do3=<state>][&do4=<state>][&return=<return page>]

Where state is 0 or 1; “0” means inactive or normal state, while “1” means active or triggered state.

PARAMETER	VALUE	DESCRIPTION
do<num>	0, 1	0	– Inactive, normal state
		1	– Active, triggered state
return	<return page>	Redirect to the page <return page> after the parameter is
		assigned. The <return page> can be a full URL path or relative
		path according to the current path. If you omit this parameter, it
		will redirect to an empty page.

Example: Drive the digital output 1 to triggered state and redirect to an empty page.

http://myserver/cgi-bin/dido/setdo.cgi?do1=1

142 - User's Manual