VIVOTEK

1.Disassemble the components of the waterproof connector into parts (A) ~ (E) as shown above.

2.Remove the plastic stopper from the bottom of the dome cap and keep the M20 hex nut for later use.

3.Depending on the number of wires, remove seals (C) from the rubber seal (B).

4.If you have external devices such as sensors and alarms, feed IO wires through the waterproof connector (E --> D --> B --> A) as the illustrated below. Note that there are 16 holes on the seal (B), and wire range is beteen 1.2 and 1.8mm.

5.Push the seal (B) into the housing (D).

6.Secure the sealing nut (E) tightly.

(A)

(B) (D)

(E)

M20 hex nut

(C)

(D)

(B)

2-2. Connect cables:

1.Use a small-size flat-blade screwdriver to secure IO wires to the included terminal blocks. You may also purchase an IO combo cable from VIVOTEK.

Wire range: 13~16AWG

Strip length: 6~7mm

Screw: M2

 

Ethernet

AC24V

DI GND

AC24V

DI4

Reserved

DI3

MIC IN

 

Line OUT

 

GND

DO2

RS485-

DO1

RS485+

DO+(12V)

AC24V DI GND

AC24V DI4

Reserved DI3

MIC IN DI2

Line OUT DI1

Audio GND DO2

RS485- DO1

RS485+ DO+(12V)

User's Manual - 11

Page 11
Image 11
Vivotek 63E-M, SD8363E user manual Connect cables

63E-M, SD8363E specifications

The Vivotek SD8363E and SD8363E-M are advanced outdoor-speed dome network cameras designed to provide high-performance surveillance in various environments. Both models are engineered to deliver reliable monitoring solutions, characterized by their robust design and exceptional technological features.

One of the standout features of the SD8363E series is its superior image quality. Equipped with a 2-megapixel sensor, these cameras are capable of delivering vivid, high-resolution images at 30 frames per second. The combination of WDR (Wide Dynamic Range) technology and IR (Infrared) illumination enhances their capability to capture clear images even in challenging lighting conditions, such as backlit scenes or during nighttime.

The cameras are designed for versatile monitoring with a powerful 30x optical zoom lens, enabling users to focus on distant subjects while maintaining sharp detail. This feature is particularly beneficial for large areas where fine details are crucial for identification purposes. The built-in P-Iris provides precise control over the aperture, thus optimizing depth of field, image clarity, and quality in various lighting conditions.

Furthermore, the Vivotek SD8363E and SD8363E-M are equipped with advanced network technology, including H.264 compression. This technology allows for reduced bandwidth and storage requirements while maintaining high video quality. The cameras support Power over Ethernet (PoE), simplifying the installation process by allowing the power and data to be transmitted through a single cable.

Another noteworthy characteristic is the intelligent video analytics feature incorporated into these models. Users benefit from automated capabilities such as motion detection, tampering detection, and a variety of customizable event triggers. These functionalities enhance the efficiency of surveillance operations, saving time and resources.

The design of the SD8363E-M variant includes additional features suited for various environmental challenges, such as IP66-rated and IK10-rated housing, ensuring resistance to harsh weather conditions and vandalism. This makes the SD8363E-M an ideal choice for outdoor installations in urban areas or high-risk environments.

In summary, the Vivotek SD8363E and SD8363E-M are cutting-edge surveillance solutions that integrate high-resolution imaging, powerful zoom capabilities, efficient compression technology, and robust environmental protection. These features make them suitable for a wide range of applications, from urban monitoring to commercial security.