Vivotek 63E-M, SD8363E user manual Windows, set mdwin as Mdwin0 Similar to mdwin. The parameter

				VIVOTEK
trigger	boot,	boot	6/6	Indicate the trigger condition:
	di,			“boot” = System boot
	motion,			“di”= Digital input
	seq,			“motion” = Video motion detection
	recnotify,			“seq” = Periodic condition
	volalarm,			“recnotify” = Recording notification.
	vi			“volalarm” = Audio detection.
				“vi” = Virtual input.
triggerstatus	String[40]	trigger	6/6	The status for event trigger
exttriggerstatus	String[40]	<blank>	6/6	The status for event trigger
exttriggerstatus1	String[40]	<blank>	6/6	The status for event trigger
exttriggerstatus2	String[40]	<blank>	6/6	The status for event trigger
exttriggerstatus3	String[40]	<blank>	6/6	The status for event trigger
di	0~15	1	6/6	Indicate the source id of di trigger.
				This field is required when trigger
				condition is “di”.
				One bit represents one digital input.
				The LSB indicates DI 0.
mdwin	0~7	0	6/6	Indicate the source window id of
				motion detection.
				This field is required when trigger
				condition is “md”.
				One bit represents one window.
				The LSB indicates the 1st window.
				For example, to detect the 1st and 3rd
				windows, set mdwin as 5.
mdwin0	0~7	0	6/6	Similar to mdwin. The parameter
				takes effect when profile 1 of motion
				detection is enabled.
valevel	<boolean>	0	6/6	Enable/Disable audio detect.
valevel0	<boolean>	0	6/6	Enable/Disable audio detect profile.
vi	0~7	0	6/6	Indicate the source id of vi trigger.
				This field is required when trigger
				condition is “vi”.
inter	1~999	1	6/6	Interval of snapshots in minutes.
				This field is used when trigger
				condition is “seq”.

User's Manual - 179