VIVOTEK

Interface Section

Ethernet 10/100 RJ45 Plug General I/O Terminal Block

Spring Contacts for Dehumidifier

 

Ethernet

AC24V

DI GND

AC24V

DI4

Reserved

DI3

MIC IN

DI2

Line OUT

DI1

GND

DO2

RS485-

DO1

RS485+

DO+(12V)

Status LED

Item

LED status

Description

1

Steady red

Power on and system booting

 

Red LED off

Power off

2

Steady red & Green blinking every 1 sec.

Network normal (heartbeat)

 

Steady red & Green LED off

Network failed

3Red blinking every 0.15 sec. & Green blinking Upgrading firmware every 1 sec.

4Red blinking every 0.15 sec. & Green blinking Restoring default every 0.15 sec.

Hardware Reset

The reset button is used to reset the system or to restore the factory default settings. Sometimes resetting the system can return the camera to normal operation. If the system problems remain after reset, restore the factory settings and install again.

Reset: Press and release the recessed reset button with a paper clip or thin object. Wait for the Network Camera to reboot.

Restore: Press and hold the recessed reset button for a while to restore. Note that all settings will be restored to factory default.

SD/SDHC/SDXC Card Capacity

This network camera is compliant with SD/SDHC/SDXC 32GB, 64GB, and other preceding standard SD cards.

User's Manual - 7

Page 7
Image 7
Vivotek 63E-M, SD8363E user manual Status LED

63E-M, SD8363E specifications

The Vivotek SD8363E and SD8363E-M are advanced outdoor-speed dome network cameras designed to provide high-performance surveillance in various environments. Both models are engineered to deliver reliable monitoring solutions, characterized by their robust design and exceptional technological features.

One of the standout features of the SD8363E series is its superior image quality. Equipped with a 2-megapixel sensor, these cameras are capable of delivering vivid, high-resolution images at 30 frames per second. The combination of WDR (Wide Dynamic Range) technology and IR (Infrared) illumination enhances their capability to capture clear images even in challenging lighting conditions, such as backlit scenes or during nighttime.

The cameras are designed for versatile monitoring with a powerful 30x optical zoom lens, enabling users to focus on distant subjects while maintaining sharp detail. This feature is particularly beneficial for large areas where fine details are crucial for identification purposes. The built-in P-Iris provides precise control over the aperture, thus optimizing depth of field, image clarity, and quality in various lighting conditions.

Furthermore, the Vivotek SD8363E and SD8363E-M are equipped with advanced network technology, including H.264 compression. This technology allows for reduced bandwidth and storage requirements while maintaining high video quality. The cameras support Power over Ethernet (PoE), simplifying the installation process by allowing the power and data to be transmitted through a single cable.

Another noteworthy characteristic is the intelligent video analytics feature incorporated into these models. Users benefit from automated capabilities such as motion detection, tampering detection, and a variety of customizable event triggers. These functionalities enhance the efficiency of surveillance operations, saving time and resources.

The design of the SD8363E-M variant includes additional features suited for various environmental challenges, such as IP66-rated and IK10-rated housing, ensuring resistance to harsh weather conditions and vandalism. This makes the SD8363E-M an ideal choice for outdoor installations in urban areas or high-risk environments.

In summary, the Vivotek SD8363E and SD8363E-M are cutting-edge surveillance solutions that integrate high-resolution imaging, powerful zoom capabilities, efficient compression technology, and robust environmental protection. These features make them suitable for a wide range of applications, from urban monitoring to commercial security.