VIVOTEK

If you enable adaptive recording and enable time-shift cache stream on Camera A, only when an event is triggered on Camera A will the server record video streams in the full frame rate; otherwise, it will only request the I frame data during normal monitoring, thus effectively save lots of bandwidth and storage.

Bandwidth

 

I frame ---> Full frame rate --->

I frame

Bandwidth

 

Activity Adaptive Streaming

 

for Dynamic Frame Rate Control

Continuous recording

Time

NOTE:

To enable adaptive recording, please make sure you’ve set up the trigger source such as Motion Detection, DI Device, or Manual Trigger.

When there is no alarm trigger:

-JPEG mode: record 1 frame per second.

-H.264 mode: record I frame only.

-MPEG-4 mode: record I frame only.

When the I frame period is >1s on Video settings page, it should be forced to make the I frame period to 1s when adaptive recording is activated.

The alarm trigger includes: motion detection and DI detection. Please refer to Event settings on page 102.

Pre-event recording and post-event recording

The Network Camera has a buffer area; it temporarily holds data for up to a certain limit. Enter a number to decide the duration of recording that will take place before and after a trigger is activated.

Priority: Select the relative importance of this recording (High, Normal, or Low). Recording with a higher priority setting will be executed first.

Source: Select a stream as the recording source.

NOTE:

► To enable recording notification, please configure Event settings first. Please refer to page 102.

Please follow steps 1~2 below to set up the recording:

1. Trigger

Select a trigger source.

Schedule: The server will start to record files on the local storage or to a networked storage device

(NAS).

Network fail: Since the time when the network fails, the server will start to record files on the local storage (SD card).

User's Manual - 123

Page 123
Image 123
Vivotek 63E-M, SD8363E user manual Continuous recording

63E-M, SD8363E specifications

The Vivotek SD8363E and SD8363E-M are advanced outdoor-speed dome network cameras designed to provide high-performance surveillance in various environments. Both models are engineered to deliver reliable monitoring solutions, characterized by their robust design and exceptional technological features.

One of the standout features of the SD8363E series is its superior image quality. Equipped with a 2-megapixel sensor, these cameras are capable of delivering vivid, high-resolution images at 30 frames per second. The combination of WDR (Wide Dynamic Range) technology and IR (Infrared) illumination enhances their capability to capture clear images even in challenging lighting conditions, such as backlit scenes or during nighttime.

The cameras are designed for versatile monitoring with a powerful 30x optical zoom lens, enabling users to focus on distant subjects while maintaining sharp detail. This feature is particularly beneficial for large areas where fine details are crucial for identification purposes. The built-in P-Iris provides precise control over the aperture, thus optimizing depth of field, image clarity, and quality in various lighting conditions.

Furthermore, the Vivotek SD8363E and SD8363E-M are equipped with advanced network technology, including H.264 compression. This technology allows for reduced bandwidth and storage requirements while maintaining high video quality. The cameras support Power over Ethernet (PoE), simplifying the installation process by allowing the power and data to be transmitted through a single cable.

Another noteworthy characteristic is the intelligent video analytics feature incorporated into these models. Users benefit from automated capabilities such as motion detection, tampering detection, and a variety of customizable event triggers. These functionalities enhance the efficiency of surveillance operations, saving time and resources.

The design of the SD8363E-M variant includes additional features suited for various environmental challenges, such as IP66-rated and IK10-rated housing, ensuring resistance to harsh weather conditions and vandalism. This makes the SD8363E-M an ideal choice for outdoor installations in urban areas or high-risk environments.

In summary, the Vivotek SD8363E and SD8363E-M are cutting-edge surveillance solutions that integrate high-resolution imaging, powerful zoom capabilities, efficient compression technology, and robust environmental protection. These features make them suitable for a wide range of applications, from urban monitoring to commercial security.