Rain Sensor Site Selection

Choosing the right installation site for the sensor module is key to obtaining the maximum benefit from your sensor system. For best results, choose a sensor installation site that provides:

Unobstructed exposure to rainfall–away from overhangs, tree branches, etc.

Protected from irrigation spray, rainwater accumulation and the possibility of submersion.

Exposure to sunlight and shade conditions similar to the landscape being watered.

Good communication signal from the sensor to the receiver.

Note: If installing a TWRFS-I rain/freeze sensor specifically for freeze detection, refer to the additional site selection criteria provided on page 13.

Before installing the sensor module, test the system again to confirm operation by using the following test procedure:

1.Activate a watering zone that is visible from the intended sensor installation site.

Note: The manual operation mode of some irrigation controllers may bypass the sensor circuit. If your controller operates like this, set an automatic cycle to start within a minute or two.

2.With the sprinklers on, press and hold the sensor test spindle until the sprinklers shut off.

Note: Irrigation control valves close at various rates. It may require several seconds for the sprinklers to shut off.

If the test is successful, the sensor is ready to install. If the sprinklers do not shut off, try moving the sensor a few feet in either direction and test again. Rotating the receiver antenna slightly may improve the signal strength. Refer to “Troubleshooting” on page 22 for additional information.

10

Page 12
Image 12
Vizio TWRS-I manual Rain Sensor Site Selection

TWRS-I specifications

The Vizio TWRS-I is a premium wireless speaker designed to elevate audio experiences with its impressive technology and features. As part of Vizio's commitment to high-quality sound, this speaker combines cutting-edge audio engineering with sleek design.

One of the standout features of the TWRS-I is its exceptional sound quality. Boasting advanced audio drivers and a specially designed enclosure, the speaker delivers clear highs, rich mid-range, and deep bass, providing an immersive listening experience. The TWRS-I is engineered to produce room-filling sound, making it suitable for both entertainment and music playback.

The speaker incorporates Dolby Atmos technology, enabling users to experience three-dimensional soundscapes. This immersive audio feature creates a more lifelike listening environment, allowing sound to come from all directions rather than just in front of the listener. This makes it an ideal choice for movie nights or gaming sessions, where ambient sound can enhance the overall experience.

Connectivity is another highlight of the Vizio TWRS-I. The speaker is equipped with Bluetooth, allowing for seamless wireless connections with smartphones, tablets, and other devices. This feature grants users the freedom to stream their favorite music directly from their devices without the need for cumbersome cables. For those who prefer a more traditional approach, the TWRS-I also includes an auxiliary input for wired connections.

Furthermore, this model supports multi-room audio, enabling users to connect multiple Vizio speakers for synchronized playback throughout the home. This function is perfect for hosting gatherings or simply enjoying music in different rooms without interruption.

The design of the Vizio TWRS-I is both modern and minimalistic, making it easy to fit into any décor. Its sleek profile and premium materials contribute to a sophisticated aesthetic that can complement any room design.

In conclusion, the Vizio TWRS-I is a feature-packed wireless speaker that stands out in the competitive audio market. With its high-quality sound, Dolby Atmos support, versatile connectivity options, and elegant design, this speaker offers an exceptional audio solution for both casual listeners and avid audiophiles alike. Whether used for movies, music, or games, the TWRS-I aims to redefine how we experience sound at home.