Vizualogic A-2000 owner manual Care and Maintenance, Power LED Auxillary A/V Input Jack

Care and Maintenance

Your Vizualogic System is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help to fulfill any warran- ty obligations and provide many years of enjoyment.

•Cleaning the Monitor Screen and Housing: The components may be cleaned by occasionally wiping with a soft, lint-free, cotton cloth that has been slightly dampened with water.

CAUTION: Do not use liquids, abrasives, aerosol cleaners, or paper cleaning products because they will result in permanent damage to the finish of your components! The LCD screen is made of a specially coated glass and can be scratched or damaged by abrasive or ammonia-based window cleaners.

•Use and Storage:

-These units contain precision electronics that must be protected from dust, dirt, and moisture.

-Never spill liquids on any of the components. Liquids, humidity, and precipitation contain minerals that will corrode electronic circuits.

•Take care to avoid the following:

-Rough handling can break internal circuit boards. Do not drop, knock, or shake the components.

-Do not attempt to paint or refinish the components. Paint can clog moving parts and prevent proper operation.

-The components can be damaged by non-expert handling. Attempting to open any of the components may void the limited warranty.

9

10

11

12

13

14

15

9.POWER LED

10.AUXILLARY A/V INPUT JACK

11.POWER – Soft Power On/Off

12.PLAY – Press this button to play the disc

13.STOP – Press this button to stop the disc

14.Disc Loading Slot

15.EJECT – Press this button to eject the disc.

16 5