VocoPro DVG-399K owner manual Setting up preferences, System Setup

Setting up preferences

Press SETUP on the remote control to get into the SETUP menus. All settings have been preset in the DEFAULT mode. This means that the most common settings will already be active when you first setup the DVG- 399K. It may not be necessary to make any changes for the DVG-399K to work correctly.

To exit the SETUP screen simply press SETUP on your remote or scroll down to EXIT SETUP on the MENU MAIN PAGE and press ENTER on your remote.

SYSTEM SETUP

Press SETUP on the remote control and be sure that SYSTEM SETUP is highlighted.

1. TV SYSTEM

Set the DVG399K’s output to match your TV set’s system format.

For example, NTSC for North American TV systems or PAL for

European systems. Select AUTO if you frequently switch between

PAL and NTSC modes.

2. SCREEN SAVER

When there is no disc or the player is idle for a period of time, screen saver will appear if this setting is ON. Using a screensaver can help protect your TV or monitor’s screen.

3. VIDEO

Choose the video mode based on what video connection you are using.

INTERLACE-YUV:When you are using a YUV Composite Video connection

P-SCAN YPBPR: When you are connected to a progressive scan TV with

Component Y, Pb, Pr cables.

PC-VGA:When you are connected to a monitor with a VGA cable.

S-VIDEO:When you are connected to a TV using an S-Video connection.

4. TV TYPE

TV Display Modes: You can select one of the following TV display modes for the video output:

4 : 3/PS: When the player is connected to a normal (4:3) TV and a wide picture is shown on the full screen, a portion may be cut off automatically.

4 : 3/LB: When the player is connected to a normal TV and a wide picture is shown on the screen, black strips appear at the top and bottom of the screen.

16 : 9: When the player is connected to a wide screen TV. NOTE: If you choose this setting and you don’t have a wide screen TV, the images on the screen may appear

distorted due to vertical compression.

To view the standard	4:3 subtitle block to	16:9 To view widescreen
4:3 picture or the cut	view the full width of	picture with a
standard 4:3 picture	the widescreen mode	widescreen TV set
Standard TV set		Widescreen TV set

5. PASSWORD

Enter your password here, to access parental controls. The first time you use this funtion, you will have to input the factory-set password which is “0000” and then press enter. You may then input your own password and then press enter again. Be sure that you write down your new password as the factory-set “0000” will not work if you have changed it.

6. RATING

Parents can control the rating of movie that can be shown on the player. Simply select the rating from the list and then press enter.

7. DEFAULT

Choosing RESTORE, restores the DVG-399K’s preferences to the original factory settings.

18