Toshiba SD-V280 Will light, If you use the unit for the first time, SET UP menu screen in may

Connecting to a TV

Signal flow

To wall outlet

Combination

VHF/UHF antenna

RF IN jack

		DVD OUT			DVD, VCR OUT	LINE IN1	UHF/VHF
DIGITAL AUDIO		ANALOG AUDIO	S	COMPONENT			IN
OPTICAL	COAXIAL	L		Y	VIDEO	VIDEO
							(FROMANT)

R

PB	L	L(MONO)	RF OUT jack
	AUDIO	AUDIO	OUT
PR	R	R	(TO TV)
		3	4
7230007448			CH

(yellow) (red) (white)

To VIDEO OUT

Audio/video cable (supplied)

To audio inputs

To antenna input

(white)
(red)
To video input	TV or monitor with
(yellow)	audio/video inputs

Setting the video channel

1 Press POWER to turn on the DVD/VCR.

2	Press DVD/VCR to select the VCR mode.
	The VCR indicator on the front panel
	will light.

3 Set the 3/4 Channel selector switch on the rear panel to CH 3 or 4.

3 4 CH

4 Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 3.

5 Press TV/VCR to select the VCR position.

The VCR indicator will appear in the

display window.

Setting the language

1	Press VCR MENU.
	If you use the unit for the first time and
	press VCR MENU, instead of the main
	menu screen on the right the “SYSTEM
	SET UP” menu screen in step 2 may
	appear.
2	Press SET + or – to select “LANGUAGE”, then press
	ENTER.

3 Press SET + or – to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER.

Select any channel to receive a TV station in your area.		4	Press VCR MENU until the MENU screen is cleared.
6 The channel number will appear on the screen for
about 4 seconds.
2B01607AE Q Sheet	3		17/7/2002, 9:32